Value for Money -Used Machine - Weaving

Wvng/11748/2018/10
14 SETS GAMMA PICANOL RAPIER LOOMS
Year: 1999, GAMMA  4-R
Width: 1900 cm;
SUMO engines;
2 looms LDEC ; 12 looms with PB
ELSY ;
4 colors; 4 weft feeders;
Staubli 2861 Dobby with 20 shafts and 16 levers installed;
Guided Rapiers ;
EWL ; ETU ;
Selvedge CUT ; Double Back Rest

Equipement per loom :
2 beams; batchers with inspection table and compensating system
12 heald frames frames ; Healds and droppers.

Wvng/11747/2018/10
06 SULZER G6200 LOOMS WITH JACQUARD
Feeding by Split beams
Width 2600mm
6 Colors

Wvng/11746/2018/10

1 BENNINGER SUPERTRONIC SECTION WARPING
W. Width:                    3400mm
Barrel Length:             3.5m
Cone Length:              1.7m
Headstock Width:        510mm
Benninger Leasing
Yarn / Filament guide system
Swivel Creel with:         528 Ends
Cone Pitch:                   330mm
Auto Stop (End breakage)
Benninger Electronic centralized tension control panel

Wvng/11745/2018/10

24 NOS TSUDOKOMA ZAX 9100 WEVING LOOMS
Working width : 210cm
Year :  2007
Staubli 1761A Cam Motion , 7 levers , leno salvage, 4 colors

Equiped with :  
4 weft acumulators
1.5 cloth rollers
1.5 Warp beams
7 Heald Frames
6000 droppers and heald wires
Status : Running coton fabrics at 1000 rpm

Wvng/11744/2018/10

12 SETS PICANOL OMNI PLUS LOOMS
Year 2002, 190 cm , 6 colors

Equiped with : 

Staubli Electronic dobby for 16 levers ( 8 levers full)
8 heald frames , 8000 droppers and wires, 3 Iro, 1.5 beams and rollers
Actualy running suiting fabrics
Immediate delivery
Running

Wvng/11743/2018/10

6 SULZER G6300 JACQUARD WEAVING LOOMS
Year: 2000/2003,

2 LOOMS SMIT G6300 WITH CX880 STAUBLI JACQUARD 2688 HOOKS
Year 2003
Width 3200mm
Double beams
Width of harness 2050mm
Repeats 4
Colors 6
Color max. capacity 8
Total per repeat: 2640

1 LOOMS SMIT G6300 WITH CX880 STAUBLI JACQUARD 2688 HOOKS
Year 2000
Width 3200mm
Double beams
Width of harness 2050mm
Repeats 4
Colors  6
Color max. capacity 8
Total per repeat: 2640

2 LOOMS SMIT G6300 WITH CX880 STAUBLI JACQUARD 2688 HOOKS
Year 2000
Width 3200mm
Double beams
Width of harness 2050mm
Repeats 4
Colors  4
Color max. capacity 4
Total per repeat: 2640

1 LOOMS SMIT G6300 WITH CX880 STAUBLI JACQUARD 2688 HOOKS
Year 1999
Width 3200mm
Double beams
Width of harness 2050mm
Repeats 4
Colors  2
Color max. capacity 2
Total per repeat: 2640

Wvng/11742/2018/10

16 SOMET EXCEL JACQUARD MACHINES
Year: 1996, Width 1900 mm ;
8 Colours ; 4 weft feeders ;
1.5 beams; 1.5 cloth rolls /
JACQUARD TYPE CX860 ;
2688  hooks installed ;
Controller JC4; modules M4 ,
Black Box
These looms are sold without Gantry

Wvng/11741/2018/10

6 SOMET SUPER EXCEL JACQUARD 190CM
Year: 2002,
Width 1900 mm; 8 Colours ;
4 weft feeders ; 3 beams per loom; 
5 looms with Fancy Beam./

JACQUARD TYPE CX 870 ; 
Capacity 2688 hooks ;
Controller jc5

Looms are sold with Gantry and Harness

Wvng/11740/2018/10
2 SOMET ALPHA JACQUARD 190CM WITH LX1600B
Year: 2005,
Width 1900mm ;
8 Colours ; 4 weft feeders
double beam (fancy beam)
3 beams;
1.5 cloth rolls

JACQUARDS :
Staubli LX1600B ; hooks capacity 5120 
JC6 controller
Looms are sold with Gantry and Harness
Wvng/11739/2018/10
4 SOMET ALPHA PGA 190CM WITH LX1602 / 3202 JUMBO JACQUARD
Year: 2007/2009,
Width 1900mm;
8 Colours ; 4 weft feeders ;
2 machines from 2007 and 2 machines from 2009;
3 beams per loom ; fancy beam , 1.5 cloth rolls per loom

JACQUARDS :
3 looms with STAUBLI JACQUARD LX1600 B; basic frame capacity 5120 ; JC6 controller
One looms with STAUBLI LX3202 of 10240 hooks ; from year 2009
Looms are sold with Gantry and Harness
Wvng/11738/2018/10
24 NOS TSUDOKOMA ZAX 9100 WEVING LOOMS
Year : 2007
Working width : 210CM ,
Staubli 1761A Cam Motion, 7 levers, leno salvage

Equiped with

1.5 cloth rollers
1.5 Warp beams
7 Heald Frames
6000 droppers and heald wires
Status : Running coton fabrics at 1000 rpm

Wvng/11737/2018/10-A
03  PICANOL OMNI PLUS-F-4-P-190 AIRJET WEAVING LOOMS
Year of construction 2000,
Working width 1900mm,
4 colours, STAUBLI cam box with 10 levers installed,

Each equipped with :
2 weft accumulators 2231Plus,
1 warp beam, pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 11” C,
5 warp stop motion bars, double warp tension,
Single pressure roll

Wvng/11737/2018/10-B
01 PICANOL OMNI plus-SUMMUM-F-6-J-190 AIRJET WEAVING LOOM
Year of construction 05/2014,
Working width 1900mm,
1 jacquard BONAS SI9-20 year of construction  09/02/2016 with superstructure,
With CI controller, format 7680 hooks – installed 7440 hooks,
Gear box & cardan shaft, 6 weft colours,

                       Equipped with :
1 warp beam Ø 800mm, 1 cloth roller,
2 warp tension rolls, sumo motor,
6 weft accumulators IRO 1131 with balloon breakers and internal PFT,
PRA, creel for 6 bobbins, weft stand, BLUE platform (Ldec),
Groz-Beckert warp detection with 6 warp stop motion bars,
R and L leno-devices (driven by electronic step-motors),
Touchscreen.

Wvng/11737/2018/10-C
01 PICANOL OMNI PLUS-SUMO MOTOR-4-J-190 AIRJET WEAVING LOOM
Year of construction 2014,
Working width 1900mm,
4 colours, foreseen for jacquard BUT without jacquard.

                       Equipped with :
1 warp beam Ø 800mm with Q2 discs,
1 cloth roller, 2 warp tension rolls diameter 120mm driven by EASING MOTION (right side),
Sumo motor, 4 weft accumulators Picanol 2231 X2 with balloon breakers and internal PFT,
PRA II plus (stepmotor) with waste dustbin, 
Airmaster, Air-tuckers right and left, 
Vertical creel for 4 bobbins, weft stand, BLUE platform (Ldec),
Groz-Beckert warp detection with 6 warp stop motion bars,
Foreseen with 1 Loepfe Thermocut (but without thermocutters),
Touchscreen

Wvng/11737/2018/10-D
01 PICANOL OMNI PLUS –SUMO MOTOR-F-4-R-190 AIRJET WEAVING LOOM
Year of construction 2011, 
Working width 1900mm,
4 colours, electronic STAUBLI dobby type S3260 with 16 levers installed (=full)

   Equipped with :
SUMO, ELO, ETU, Blue box,
4 weft accumulators 2231 X2 with balloon breaker and PFT,
12 heald frames GTP DRC30 Hybrid 13” C,
Leno right + left (step motor), 1 warp beam Ø 805mm,
2 big warp tension rolls 120mm (spring Right side);
Warp stop motion GROB with 6 detection bars, 1 cloth roll,
Waste dustbin, 400V-50Hz.
Only 28 production hours 
This loom ran at ITMA 2011 and was furthermore used as a showroom machine.

 

Wvng/11737/2018/10-E
04 PICANOL Omni plus800-4-R-220 AIRJET WEAVING LOOMS
Year of construction 2005,
Working width 2200mm,
4 colours but only 2 colours installed,
Electronic STAUBLI dobby type 2881 with 15 levers installed,

                       Each equipped with :
1 warp beam Ø 800mm, Kasuga or normal dropper warp stop motion,
2 weft accumulators VSG 1131 can plus,
4 heald frames DRC30, 5.000 healds, Mini batcher.

Wvng/11737/2018/10-F
01 PICANOL OMNI-4-R-220 AIRJET WEAVING LOOM
Year of construction 06/2001
Working width 2200mm,
4 weft colours installed, Electronic STAUBLI dobby type 2871 with 16 levers installed (= maximum),

                       Equipped with :
ETU and ELO motor, 4 weft accumulators 2231,
Creel for 4 colours, 1 warp beam Ø 1000mm,
6 heald frames 13” C, 3000 healds, 3000 droppers,
External batching motion but without the batching motion,
Grob warp detection with 5 warp stop motion bars,
Double warp tension roll with easing motion R & L,
Double pressure roll, R&L support for selvedge split bobbins,
Waste dustbin, weaving step.

   
Wvng/11737/2018/10-G
01 PICANOL OMNI PLUS-SUMO MOTOR-4-P-220 AIRJET WEAVING LOOMS
Year of construction 02/2016,
Working width 2200mm,
4 weft colours,
With  STAUBLI cam bow type 1781A with 9 levers installed (can be increased to max.11 levers),

                       Equipped with :
1 beam diameter 800mm, 1 cloth roller,
2 warp tension rolls, easing-motion, sumo motor,
4 weft accumulators IRO BLUE 22 EASY SET (with balloon breakers and internal PFT),
PRA, creel for 4 bobbins with 4 IRO TFE-8 detections,
Weft stand, BLUE platform (Ldec),
Groz-Beckert warp detection with 6 warp stop motion bars (R and L detection),
R and L leno-devices (driven by electronic step-motors),
Foreseen for ELSY but without, led light bar,
4 heald frames DRC30 GTP Hybrid 158 type “13”  J, touchscreen

 

Wvng/11737/2018/10-H
01 PICANOL OMNI PLUS-6-P-220 AIRJET WEAVING LOOM
Year of construction 2002,
Working width 2200mm,
6 colours,
STAUBLI cam box type 1751A  with 6 levers installed,

                       Equipped with :
4 weft accumulators 2231P, 1 warp beam,
Pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 13” J, 5 warp stop motion bars,
Double warp tension, single pressure roll

 

Wvng/11737/2018/10-I
02  PICANOL OMNI PLUS-6-R-220 AIRJET WEAVING LOOMS
Year of construction 2000,
Working width 2200mm,
6 colours,
Electronic STAUBLI dobby type 2871  with 6 levers installed,

Each equipped with :
4 weft accumulators 2231P,
1 warp beam, pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 13” J,
5 warp stop motion bars,
Double warp tension, single pressure roll. (loom 247366 also has L&R Tucking units)

Wvng/11737/2018/10-J
02 PICANOL OMNI PLUS-4-P-220 AIRJET LOOMS
Year of construction : 2000,
Working width 2200mm, 4 colours,
STAUBLI cam box type 1761 A with 9 levers installed,

Each with:
4 heald frames for heddles 13” C DRC2,
4 warp stop motion bars, 5.000 healds & 5.000 droppers,
ELSY L&R, 4 weft accumulators type 1131,
Without cloth roller, 1 warp beam diameter 1000m

Wvng/11737/2018/10-K
04 PICANOL OMNI PLUS-F-2-P-220 AIRJET WEAVING LOOMS
Year of construction  08/2001,
Working width 2200mm, 2 colours,
With STAUBLI 1661 with 4 / 6 levers installed (max. 8 levers possible)    

Each loom equipped with  :
SUMO motor, ELO, ETU, 
2 weft accumulators Picanol 1131plus, 1 weft stand,
1 vertical creel for 2 bobbins,
2 warp tension rolls Ø 120mm driven by easing motion right and left,
With KASUGA warp detection,
4 heald frames Steel Heddle Hybrid Power 158 DRC2  13” type C,
LENO-device right and left, electrical waste cutter right, 1 warp beam,
1 cloth roll, display, walking step.

 

Wvng/11737/2018/10-L
01 PICANOL OMNI PLUS-2-P-220 AIRJET WEAVING LOOM
Working width 2200mm,
2 colours, with STAUBLI 1761A with 8 levers installed (=full)

Equipped with  :
SUMO motor, ELO, ETU, 2 weft accumulators Picanol 1131,
1 weft stand, 1 vertical creel for 2 bobbins,
2 warp tensions roll diameter 120mm driven by easing motion right and left,
With KASUGA warp detection,
4 heald frames Steel Heddle Hybrid Power 158 DRC2  13” type C,
LENO-device right and left, electrical waste cutter right,
1 warp beam diameter 800mm , mini-batching motion Neuenhauser, 
Display, walking step.

Wvng/11736/2018/10
28 SETS TOYODA JAT810 AIRJET LOOMS
Year : 2015
Weaving width : 210cm
04 Colour weft selection
Staubli positive Cam motion
Model 1681
06 Levers installed
Leno Selvedges
Electronic let off 1000mm beam langes
Electronic take up
Double back rest rollers
On loom cloth roller take up

Wvng/11735/2018/10-A

10 SETS TSUDAKOMA AJ LOOMS
Model ZA 205
Width : 330cm
Crank motion
02 Colour
Full Beam Execution
On loom take up
Side Tuckers
1 Beam 1M flange
2 Feeders
4 Harness
1 Cloth Roll
(9) Year 1989
(1) Year 1985

Wvng/11735/2018/10-B

36 TSUDAKOMA AIRJET LOOMS
Year : 1996
Model ZAX
2 Color with profile reed
Weaving width :  330cm
Plain Crank motion running 2 harness
Leno Selvedge
With APR
With message terminal “I” High mounted over loom

Each loom with :
04 Harness frames
1 Warp beam 914mm / 1000mm diameter flanges
All beams are single full width beams
02 Weft Feeders
01 Batcher with inspection
02 Warp stop Electrode Bars
01 loom reed
Heddles and Droppers as installed in loom
480 Volts

Wvng/11734/2018/10 - A
10 SETS PICANOL AIRJET LOOMS
Model OMP-Sumo Motor 2P
Year 2013
Weaving width : 340cm
02 Colors
Staubli Cam motions
Model 1681
06 Levers installed
Leno Selvedges
Double back Rest rollers
Single beam Execution 1000mm Beam Diameter
Cloth Roller take up
Electronic take up
Electronic let off

Each loom with :
1.5 Warp beams
1.25 Cloth rollers
06 Harness frames
02 IRO weft Feeders 2231 X2
06 Warp Stop Bars
Heddles and Droppers as fitted

Wvng/11734/2018/10 - B
29 SETS PICANOL AIRJET LOOMS
Model : OMP800-2P
Year : 2008
Weaving width : 340cm
02 Colours
Staubli Cam motions
Model 1661
06 Levers installed
Side Tuckers
Double Back Rest Rollers
Single Beam Execution 1000mm Beam Diameter
Cloth Roller Take up
Electronic take up
Electronic let off

Each loom with
1.5 Warp beams
1.25 Cloth Rollers
06 Harness frames
02 IRO weft Feeders 2231 X2
06 Warp Stop Bars
Heddles and Droppers as fitted

Wvng/11734/2018/10 - C
71 SETS PICANOL OMNI AIRJET LOOMS
Year : 1999
Weaving width : 340cm
02 Colors
Staubli Cam motions
Model 1600B
04 Levers installed
Side and Centre Tuckers
Double Back Rest Rollers
Single Beam Execution 1000mm Beam Diameter
Cloth Roller take up
Electronic take up
Electronic let off

Each loom with :
1.5 Warp beams
1.25 Cloth Rollers
04 Harness frames
02 IRO weft Feeders 2231B
06 Warp Stop Bars
Heddles and Droppers as fitted

Wvng/11734/2018/10 – D

42 SETS PICANOL OMNI PLUS SUMO MOTOR AIRJET LOOMS
Year : 2015
Weaving width : 220cm
04 Color weft selection
Staubli Positive Cam motion
Model 1681
06 levers installed
Leno Selvedges
Electronic let off 1000mm beam langes
Electronic take up
Double back rest rollers
On loom cloth roller take up

Wvng/11733/2018/10

04 SETS PANTER MODEL E6 P LOOMS
Working width : 3,40M
Year : 2006
 
Equipped with:
8 Colours
Electronic Dobby Staubli 2668, with 20 levers installed
14 Heald Frames
4 Weft Feeders ROY CHRONO
1.5 Upper Beam
1.5 Down Beam
1.5 Cloth Roller
6.000 Droppers & Healders

Machines in very good condition

Wvng/11732/2018/10

02 SETS BENNINGER SUPERTRONIC WEAVING MACHINES
Width 220cm
01 m/c Year 1988 and 01 m/c 1989
Creel 320 with m/c year 1988
Creel 640 pos with m/c Year 1989
Delivery ready

Wvng/11731/2018/10

6 SULZER TERRY LOOMS G 6200 B 260 F6 J

2 Machines G6200 are with Jumbo Bonas Type 600 / MJ9 with 6120 hooks,
Foreseen for 9120 hooks Yoc 2000
4 Machines G6200 with Bonas Type 500 with 2688 hooks Yoc: 1997

4 VAMATEX TERRY LOOMS 260 SP 1151 ES

4 Vamatex 260 SP 1151 ES mit Bonas 250 MJ with 2688 hooks , Yoc. 96 / 97

Accessories for all the machines:
1.5 warp beam 
1.5 cloth rollers
4  Prewinders / per machine
5000 droppers
Including the Gantry
Harnish is new

Wvng/11730/2018/09

48 SETS PICANOL LOOMS

14 PICANOL DELTA X
WW 190cm, 2 Colour, Year 2001,Camme 6 Levars

8 PICANOL OMNI PLUS
WW 220, 4 Colour, Year 2003, Staubli Camme  Mod. 1661, 8 Levers Sumo Motor

15 PICANOL OMNI PLUSS
WW 220cm, 4 Colour Year 2004, Staubli Dobby 2871,16 Levers Sumo Motor

O4 PICANOL OMNI PLUS 800 
WW 190cm, 4 Colour, Year 2007, Staubli Dobby 2881,16 Levers Sumo Motor

05 PICANOL OMNI PLUS 800
WW 190cm, 4 Colour,Year 1 X 2008 1 X 2010, Camme Staubli 1681, 8 Levers Sumo Motor

02 PICANOL OMNIPLUS 800
WW 220cm, 4 Colour ,Year 2006, Dobby Staubli 2881,16 Levers Sumo Motor

01 Compressor Atlas Copco Mod. Vsd 315 Year 2000

Acessories X Each Looms
4 Weft Feeder
8 Frames
1.5 Beams 800/940
2 Cloth - Roll
7.000 Heddles And Drop Wires
1 Reed

 

Wvng/11729/2018/09

NO. 8 X SULZER PROJECTILE LOOMS
TYPE:  PU, 85"VSD 125 KR D1
YOC : 1980-1981

Accessories:
Dobby complete with 18 shafts
8 heald frames
2 weft accumulators
1.5 warp beams, dia 800mm
Batching motion added (original cloth take up still existing)

Wvng/11728/2018/09

02 SULZER MODEL G6200-W220 N6 SP16 LOOMS
Working Width : 220 cms.
Yoc 1998.
With electronic Fimtessile dobby of 16 and 15 shafts,
Electronic Let off and take up

Each equipped with:
8 heald frames, 3 weft feeders,
1 warp beam,
1,5 cloth rollers,
5.000 heddles and 5.000 droppers.

Wvng/11727/2018/09

12 SETS VAMATEX MACHINES

03 Sets VAMATEX looms type P-401-S of 190 cms., Yoc 1989 with LP10, Fimtessile dobby
mechanical type HP-600 with 20 shafts.

06 Sets VAMATEX looms type C-401-S of 190 cms., Yoc 1988 with MIDIMAT, Fimtessile
dobby mechanical type HP-600 with 20 shfats.

Each equippe with:
14 heald frames,  3 weft feeders type Roj AT-1200,
1,5 warp beams of 800 mm diam., 2 cloth rollers,
4.000 Heddles and droppers.

02 Sets VAMATEX looms type  P-1001-ES  of 190 cms., Yoc 1998, with electronic Staubli
dobby model 2660 of 20 shafts.

01 Set VAMATEX loom type P-1001-SUPER EK of 190 cms. Yoc 2001, with electronic
 Staubli dobby model 2668 of 20 shafts.

Machines with  Electronic let off and take up.

Each equippe with:
14 heald frames,  3 weft feeders type Roj Quarz ,
1,5 warp beams of 800 mm diam., 2 cloth rollers,
4.000 Heddles and droppers.

Wvng/11726/2018/09

12 SETS SECONDHAND SOMET EXCEL & SUPER EXCEL MACHINES
Years 1995-96-97-98,
Width 210 cms, 8 colors,
Electronic Dobby with 20 shafts fitted

Each loom with:

12 Heald Frames
4 Weft feeders
1,5 Beams
1,5 Cloth Rollers
Heddles and Droppers
Status   :  Running

Wvng/11725/2018/09

12 SETS PICANOL GAMMA-6-R-190 CM RAPIER MACHINES
Year of Make   2002.09        
Width : 190cm
06 colours
Shedding Motion   Low built dobby, Staubli 2670 type electronic

Equipped with:
Let-Off Motion    Micro-processor controlled, with continuous drive
Electronic Take-up
Frame for max. 20 hooks     
16 hooks for shedding motion
12 pcs of Heald-Frames (riderless type)
With metalised cloth roll, tube dia. 89mm
1.0pcs per weaving machine.
 Warp Stop Motion  Electrical type Grob KFW2400 - pitch 30mm
Selvedges  Independant selvedge motion by conjugated cams.
3 ends leno left and right - type ELSY
Leno bobbin rack RHS for 8 bobbins LHS for 8 bobbins
Electrical selvedge cutters on both sides.
Machine Drive  - SUMO main motor with direct machine drive, OPTISPEED 
controlled and set by the microprocessor.    
High speed main shaft (speed= 5x machine speed)
selvedge and let-off motion working in closed oil bath.
Centralised greasing points at weaverside.
 Power Supply  Voltage 400 - 3 Phase - Frequency  60Hz
                          Max. allowed variations:  +/- 10%
                          for Multi-Speed, PLF device.
Warp beam  : Single-section, Class-2 Flanges, Flange dia. 805mm x Barrel dia. x 218mm
                       (to be inclusive of 1.5pcs per weaving machine)
6 weft accumulators type SIRIO "Progress" with
Feeding unit for 6-heads, Accumulator stand.
Droppers pins and Heald wires Approx. 6,000pcs per weaving machine

Machines condition excellent and in operation.

Wvng/11724/2018/09

18 PCS. PICANOL OPTIMAX-6-R WEAVING MACHINES
Year 2011
Working Width: 220cm , GC type ( Not free fly)
With Staubli 2670B Dobby 20 levers

Accessories per machine:
10 Heald Frames
4 Weft Feeders
1,5 Warp Beam (914mm)
1,5 Cloth Rolls
6000 Heddless and Droppers
Running

Wvng/11723/2018/08

72 SETS PICANOL OMNI PLUS 800 AIRJET LOOMS
Working width: 220cm
Year: 2007
4 Nozzles
With Staubli Dobby 2871

Accessories to each loom :
2.5 weft accumulator
10 heald frames
1.5 cloth roller
1.5 warp beam

Wvng/11722/2018/08

02 PICANOL RAPIER LOOMS TYPE GAMMAX-8-R-190
Year of construction 2003,
Working width 1900mm,
8 colours,
Electronic STAUBLI dobby type 2670 up to max. 20 shafts,
16 levers installed,

Each equipped with
8 weft accumulators Luna X2,
4 heald frames DRC 2 13”,
5.000 healds, 5.000 droppers,
1 warp beam Q3 diameter 1000mm,
1 cloth roller

Wvng/11721/2018/08

02  Picanol RAPIER WEAVING LOOMS TYPE Gamma-8-R-190
Year of construction 1999,
8 colours,
Working width 1900mm,
staubli dobby type 2670
Equipped with 20 levers, SUMO motor

Each equipped with:
2 warp beams Ø 800mm,
2 cloth rollers, 10 frames,
4 weft feeders Roj Chrono, 6 warp stop motion bars,
healds and droppers, free flight.

Wvng/11720/2018/08
05 PICANOL RAPIER LOOMS TYPE GAMMA-4-R-190
Year of construction 2000
Working width 1900mm,
4 colours, electronic STAUBLI dobby type 2622 with 12 levers installed,
Sumo motor,

Each equipped with :
2 weft accumulators ROJ Chrono with bobbin stand and electrical command box, 
1 ½  warp beam Ø 1100mm,
1 batching motion PBM-1 with weavers’ walking floor,
6 warp stop motion bars,
6.000 healds, 6.000 droppers, 
6 heald frames for 13” heddles DRC2,
Elsy L&R, double back rest.

Wvng/11719/2018/08
14 PCS. PICANOL GAMMA-6-R WEAVING MACHINES
Year  : 2002-2003
Working Width: 220cm
With Staubli 2670 Dobby 20/16

Accessories per machine:
10 Heald Frames
4 Weft Feeders
1,5 Warp Beam (914mm)
1,5 Cloth Rolls
6000 Heddless and Droppers
Running

Wvng/11718/2018/08

SETS 2 PICANOL RAPIER LOOMS  - 2 x 3.4m
Machine Ref: G2-LOO311
Description: 2 x 3.4m Picanol Gamma and Gammax, with Batchers, 1999 and 2006
W. Width: 3400m
Year: 1999 and 2006
Serial Nos: 241027 and 285034

Each comprising of:
Type: Gamma & GammaX
Width: 3400mm
Weft Insertion: RAPIER
Weft Colours: 4
Accumulators: 4
Make and type: IRO – Chrono-X2
Cone stand: 1
Selvedge waste bin: 1
Dobby model & type: STAUBLI 2670 & 2622
Installed levers: 20 & 10
Installed undermotions: 20 & 10
Frames supplied: 16 & 14
Dropper bars: 6
Loom take-up: Picanol fabric batcher
Loom let-off: Electrical
Warp beams: Gamma - 3 Euro beams with 800mm Flanges
GammaX - 4 Euro beams with 100mm Flanges (i.e. 2 x sets)
Cloth rollers: 0 at present
Heald wires: As on loom
Droppers: As on Loom
Spares: None

Loom Dimensions:
Length: 6.0 metres
Width: 2.1 metres
Estimated Weight: 4500 Kgs

Additional information:
Status: Still in operation and can be seen operating
Condition: Complete and in excellent condition
Delivery: Mid October 2018 onwards
Transport: 2 x 40ft Containers

Wvng/11717/2018/08

06 PCS PICANOL OMNI PLUS LOOMS

04 PCS PICANOL OMNI PLUS F-4, CAM MOTION
Yoc 2001, W.Width 220cm
Staubli Cam 1661, 2 Colours, Cams 1/1

Equipment of each loom:
8 heald frames
2 weft accumulators ROJ
1 warp beam
1 cloth roller
6000 heddles & droppers

Machines Stopped on mill floor, complete, connected. Testing is possible

02 PCS PICANOL OMNI PLUS F-6-R, DOBBY
Yoc 2002, W.Width 220cm,
Staubli dobby 2871,16 Shafts, 4 Colours

Equipment of each loom:
10 heald frames,
4 weft accumulators ROJ
1 warp beam,
1 cloth roller,
6000 heddles & droppers

Machines in good technical condition; still working

Wvng/11716/2018/07

15 SETS SOMET THEMMA SUPER EXCEL LOOMS
Yoc 1998 ,
WW : 2200, Socos System, Dobby Staubli Type 2670,Rapier

Each With : 
4 Accumulators ,
20 Leavers ,
16 Leavers Installed
14 Heald Frames,
2 Warp Beams,
2 Cloth Rollers,
4000 Droppers

04 SETS SOMET THEMMA SUPER EXCEL LOOMS
Yoc 1999 ,
Ww : 2100, Socos System, Dobby Staubli Type 2670, Rapier

Each With :
4 Accumulators ,
20 Leavers ,
16 Leavers Installed
14 Heald Frames,
2 Warp Beams,
2 Cloth Rollers,
4000 Droppers

Wvng/11715/2018/07

63 SETS PICANOL LOOMS

14 SETS PICANOL DELTA X WW 190 CMS YEAR 2001
08 SETS PICANOL OMNI PLUS WW 220 CMS  CAMME STAUBLI  1661 YEAR 2003
15 SETS PICANOL OMNI PLUS WW 220 CMS DOBBY STAUBLI 2871 YEAR 2004
14 SETS PICANOL OMNI PLUS 800 WW 190 CMS DOBB STAUBLI 2881 YEAR 2007
04 SETS PICANOL OMNI PLUS 800 WW 190 CMS CAMME STAUBLI 1681 YEAR 2010
08 SETS PICANOL OMNI PLUS 800 WW 220 CMS DOBBY STAUBLI 2881 YEAR 2006

Each looms with
8 Frames
7.000 Heddles and drop wires
2 Cloth-roll
1.5 Beams 800
2 Weft feeders x 2 colour
4 Weft feeders x 4 colour
1 Reed
6 Drop wires bars
All spare parts in the mills included (cams -reed - etc.etc.)

Wvng/11714/2018/07

SUZUKI'S  AUTOMATIC SAMPLE WARPING MACHINE
Model: NAS-10-2500MM
Yoc: 1997

WARPING MACHINE
W. Width -  Max 2.500mm
Warping Yarn Speed - 200 ~ 900 m/min
Working Length -  10 ~ 90 m
Number of Yarn: 10 colors
Kinds of Yarn - Wool, Cotton, Synthetc, Silk and Various kinds of Yarn
Warp Density - Min 4 ends / cm  Max As desired depending on the kinds of Yarn
Automatic Stopping Completion System: Beam
Machine Controls -  Touch Panel Display, Automatic Control System
Voltage: 200 V

CREEL STAND
10 Bobbins Creel with Tension Dropper Device
Automatic Yarn Color Selecting Device
Tension Adjusting Device
Miss-Catching Stopping Device
Automatic Stopping Device for Yarn Snapping

BEAMING DEVICE
Warp Beam Direct Winding System
Beam Flange: 1,000 mm dia
Beam Length: 3,300 mm max
Main Power: 1.5 kw

OPTION
Rotational Creel 4 heads.....  Included

Wvng/11713/2018/07

1 x STAUBLI USTER DELTA 200 AUTOMATIC DRAWING-IN MACHINE
W.W. 220cm,
Year 1993 - 2017
Max. Capacity 28 shafts

Equipped to work with :
24 heald frames,
Suitable for drawing of 2 warp beams (upper and ground beam),
2 preparation trolleys (up 280 cm frames)
With computer and keyboard, air compressor,
Machine in perfect condition - frequently upgraded by Uster/Stäubli,
Presently running

Wvng/11712/2018/07

1 BENNNGER SUPERTRONIC SECTIONAL WARPER MACHINE
Yoc 1993,
Working width 2200 mm,
Max. warping speed 800 m/min.,
Max. warp width 340 mm,
Max. flange diam. 1.000 mm, 380 volts / 50 cycles / 3-phase
With
2 WARPING CREELS, make Benninger, Year 1993
1 x 480 creel positions, H-type,
1 x 680 creel positions, H-Type
Autom. thread tensioner plate type, Electr. thread stop motion

Machine excellent condition,

Stopped on mill floor - ready for test run.

Wvng/11711/2018/07

50 NOS. TOYOTA MODEL JAT-610 AIR JET LOOMS
Model : JA2SF-190TN-EF-T610   
Cam Shedding for 7/8 shafts, 2-Color weft insertion,
With Toyoda's Negative Cam Shedding  
Year : 2002 Jan.
Nominal Reed Space: 190cm
Lef-Off                  :      Electronically Let-Off motion (digital AC servo motor)
                                    Double-Back-Roller with positive easing 
                                    (adjustable forward/back/up/down position)
Take-Up                 :    Electronic (gearless) Take-up Motion, digital AC servo motor)
Shedding                :    Negative Cam Shedding (Max. of 7-8 heald frames)
Weft Insertion        :     Electronic drum 2-Color at will
                                    High-propulsion main nozzle; Highly responsive solenoid
                                    valves; Four independant sub-nozzle tanks;                                
                                    Automatic pick finder, Automatic initial 
                                    Condition setting system (ICS), A type Drum band,
                                    8 Valves, Cutting Blow, Automatic Weft Insertion Device (ATC),
                                    Toyoda Automatic Pick Operator (TAPO), Tandem Nozzle,
                                    Right Stretch Nozzle (Tensioner) with doublers feeler, and ABS.           
Invertor                :      Central 25kw, Speed Control Inverter - separate device for 5 looms.
Easing Device        :    Positive Easing, Fell Forward Motion
Selvage                 :     Left/right rotary full-leno selvage device
Stop Motion           :    Reflecting type weft detector 
                                   Electric warp stop motion 
                                   Leno selvage and waste selvage yarn stop motion
                                   4-color tower lamp
Lubrication           :     Oil bath lubrication for main parts, Centralized and Automatic
                                  Grease lubrication system (Full Automatic).                                   
Main Control         :    Touch screen input format with a large screen, interactive
                                   Type multi-mode function panel; 32-bit CPU; 
                                   Multi-Function Memory Card system, IFC (Intelligent Filling Controller),
                                   Beaming and Cloth take-up Projection, Timing checker, Weekly Data+Graphing,
                                   and with Power outage STOP Function.
Drive Motor          :     4P, 3-phase induction motor 1.8kw, 200V/60Hz 
                                  Start, stop, forward/reverse, Slow motion operation by push-button switches.
                                  Stopping by solenoid break (12kg m), 
                                  With automatic compensation of fixed position stops.

Wvng/11710/2018/07

8 SETS DORNIER RAPIER WEAVING LOOMS
Model PTV 4/S
Year 2002
Working width 2200 mm
With STAUBLI elec. Dobby, Type 2600
4 colors
16 Levers max.
16 Levers installed
controlled by Color Selector
Leno Selvedge
Speed 430 rpm
Auto Pick Finder
Auto Shed levelling
On-Loom Take-up

Each loom equipped with:
1 Warp Beam, Flange dia. 1000 mm
2 Cloth Rollers
4 Weftfeeders
16 Heald Frames
6 Drop Wire Bars

12 SETS DORNIER RAPIER WEAVING LOOMS
Model PTS 8/S
Year 2008
Working width 2200 mm
With STAUBLI elec. Dobby, Type 2670
8 colors
20 Levers max.
20 Levers installed
controlled by Color Selector
Leno Selvedge
Speed 430 rpm
Auto Pick Finder
Auto Shed levelling
On-Loom Take-up

Each loom equipped with:
1 Warp Beam, Flange dia. 1000 mm
2 Cloth Rollers
8 Weftfeeders
20 Heald Frames
6 Drop Wire Bars

Wvng/11709/2018/06-B
8 SETS PICANOL OMNI PLUS AIRJET LOOMS
Year: 2002/2003
Width 2200mm
Staubli dobby 2861 with 16 levers
4 colours
Weft accumulators 3 minimum;
6 heald frames
Delivery on cloth roller
Beams and cloth rollers 1.5
Beam diameter 1000mm
Looms still erected on mill floor and electrically connected

Wvng/11709/2018/06-A
8 SETS PICANOL OMNI PLUS AIRJET LOOMS
Year: 2003,
Width 2200mm
STAUBLI cam 1651 with 8 levers installed
4 colours
6 healded frames  
3 weft feeders ; PBM Batcher  
1.5 beam per machine (dia 1000 mm)
Looms still erected on mill floor and electrically connected

Wvng/11708/2018/06

5  SETS DORNIER AIRJET LOOMS
2  Type LWVR 4/E – 2000 Year
Texkimp creel with 1620 positions - 2005 year
800 max rpm
1.88mm max fabric width
Electronic take up
2 color weft fitted
Dornier 5 roll tensioning stand
1.5m ø roll max.
5.7 kw/h 
3  Type LWVR 2/E – 1999 Year
Texkimp creel with 1620 positions - 2005 year
800 max rpm
1.88mm max fabric width
 Electronic take up
 2 color weft fitted
Dornier 5 roll tensioning stand
1.5m ø roll max.
5.7 kw/h 
Running at 800 rpm
Electrical: 380V/50/60hz

Wvng/11707/2018/06
02 PICANOL OMNI PLUS-6-R WEAVING LOOMS
Year of construction 2000,
Working width 2200mm, 6 colours,
Electronic STAUBLI dobby type 2871  with 6 levers installed

Each equipped with :
4 weft accumulators 2231P,
1 warp beam,
Pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 13” J,
5 warp stop motion bars,
Double warp tension, single pressure roll.

(loom 247366 also has L&R Tucking units)

Wvng/11706/2018/06
1 X KARL MAYER DIRECT WARPER, 1998
Without creel
Type: ZMZ 1800 / 1000 NC1
Working width: 1’800mm
For beams up to diameter 1’000mm
Expandible comb reed, foot break, digital controls, press roll
Electronic doffing control, dc drive

6 X DORNIER RAPIER LOOMS, HTV 4 / J, 1991
Working width: 2000mm
Electronic staubli jaquard CX 860 for 2688 hooks
Up to 4 colours
Warp beam diameter 1800mm
Batching motion

10 X DORNIER RAPIER LOOMS, HTV 8 / J, 1991
Working width: 2600mm
Electronic staubli jaquard CX 860 for 2688 hooks
Up to 8 colours
Warp beam diameter 1800mm
Batching motion

Wvng/11705/2018/06

12  SETS SULZER 213 ES 105 E10 D2 WEAVING MACHINES
Yoc: 1976
WW: 213“ or 540 cm
4 machines worked 3.6 m
8 machines worked 4.2 m

Each machine with: 
Sulzer batcher
6 cams installed
1 weft feeder per machine
6 heald frames per machine
2 warp beams per machine
 
Wvng/11704/2018/06

10 SETS SECONDHAND AIRJET LOOMS
Model - LWV/S 3600
Yoc - 1999
W widht  - 3600 mms
Colours – 4
Electronic Staubli dobby model 2670 (16 shafts fitted)
 
Each machine complete with following accessories :
3 Half warp beams with flanges diam.800 mms
6 Heald frames for cams machines
12 Heald frames for dobby machines
1 Set of weft accumulator complete of stand , creel ,control boz and weft accumulators (2 or 4)
1,5 Take up roller
8.000 Heald wires and drop wires

Wvng/11703/2018/06

NO 1 SECTIONAL WARPER BENNINGER MODEL BEN MATIC
Year 1998, width 220cm,
With Benninger Creel  BEN GARD,
576 position with electronic yarn tension control,
Automatic thread cutting device, pitch 21 cm x 21 cm.

Status Running

Wvng/11702/2018/06
20  SETS SULZER G6500 WEAVING LOOMS
Year 2008,
Nom. width 200 cm
With top beam equipment
8 weft insertion colours
With STAEUBLI electronic dobby
Type 2861
24 shaft drives

Accessories:
8 weft accumulators, type Luna X2,
14 heald frames,
6.000 heddles and droppers,
1,5 warp beams, 1.5 cloth rolls,

12 SETS SULZER G6500 WEAVING LOOMS
Year 2011
Nom. width 200 cm
8 weft insertion colours
With STAEUBLI electronic dobby
Type 2861
20 shaft drives

Accessories:
8 weft accumulators, type Luna X2, 14 heald frames
6.000 heddles and droppers
1,5 warp beams, 1.5 cloth rolls

Wvng/11701/2018/06

2  SETS SULZER MODEL G-6200-W220 N6 SP16 LOOMS
Working Width : 220 cms.
Yoc : 1998,
With electronic Fimtessile dobby of 16 and 15 shafts,
Electronic Let off  and Take up.

Each equipped with:
8 heald frames, 4 weft feeders,
1,5 warp beams of 80 cms diametre flange,
1,5 cloth rollers,
5.000 heddles and 5.000 droppers.

Wvng/11700/2018/06

10 SETS PICANOL OMNI 4-P LOOMS
WW 280 cms
Year 2000 
Camme staubli 6 shaft
All machine with side tuck-in

Each looms with:
6 frames
2 weft feeders
4000 heddles and drop wires
1.5 beams
1.5 cloth-roll
6 drop wires bars
Machine in running 
Delivery ready

Wvng/11699/2018/06
08 SETS SOMET MATER SM 93 MACHINES

01 SOMET MASTER SM 93
WW : 230cms. Year : 1989
o colour - Staubli dobby 2232 s 20 levers installed  with socos

Looms with:
10 frames
4.000 heddles and drop wires
1.5 cloth-roll
1.5 bems
2 weft feeder 

02 SOMET MASTER SM 93
WW : 210cms. Year : 1989
8 Colour-Staubli dobby 2232rs 20 levers installed - with socos

Each looms with:
8 frames
4.000 heddles and drop wires
1 beams dia. 800 
1.5 cloth-roll
2 weft feeders
6 drop wires bars.

05 SOMET MASTER SM 93
WW : 190cms. Year : 1988/89
8 colour - staubli dobby 2232 s  20 levers installs
Only 01 looms with socos

Each looms with:
8 frames
4.000 heddles and drop wires
1 beams dia. 800
1.5 cloth-roll
2 weft feeders
6 drop wires bars

Wvng/11698/2018/05 (A)

4 SETS DORNIER H MODEL RAPIER LOOMS
Model - HTV M/S
Year - 1989
Edu control panel
Working with – 210 cm
Color weftmselection  - 2
Staubli mechanical rotary dobby
Model - 2037
Lever capacity - 16
14 levers installed running 4 harnessc
Mechanical take up
Electronic let off
Off loom take up
Leno selvedges
Loepfe  thermal cutters with 2 cutters
Set up for full width temples – without temples

Each loom supplied with
1 warp beam 1000mm diameter
1 batcher
4 harness frames
2 weft  feeders and creel stand
4 warp stop bars

Wvng/11698/2018/05 (B)

1SET DORNIER H MODEL RAPIER LOOM
Model -  HTV M/S
Year – 1990
At1 control panel
Working with - 210 cm
Color weft selection - 2
Positive cam motion – 4 levers installed
Mechanical take up
Electronic let off
Off loom take up
Leno selvedges
Loepfe thermal cutters with 2 cutters
Set up for full width temples – without temples

Each loom supplied with
1warp beam 1000mm diameter
1 batcher
4 harness frames
2 weft feeders and creel stand
4 warp stop bars

Wvng/11698/2018/05 (C)

1 SET DORNIER H MODEL RAPIER LOOM
Model - HTV 4/E
Year -1990
At1 control panel
Working with : 210 cm
2 color weft selection
Positive cam motion – 4 levers installed
Mechanical take up
Electronic let off
Off loom take up
Leno selvedges
Loepfe thermal cutters with 2 cutters
Set up for full width temples – without temples

Each loom supplied with
1 warp beam 1000mm diameter
1batcher
4 harness frames
4weft feeders and creel stand
4 warp stop bars

Wvng/11698/2018/05 (D)

4 SETS  DORNIER RAPIER LOOMS
Model - PTS8S
Year 2007
Weaving width - 190 cm
8 color with ECS system
Leno selvedges
At control panel dialong 2
Grosse electronic jacquard
Model EPJ2 , Year 2002
2688 hooks installed

Wvng/11698/2018/05 (E)

2 SETS DORNIER RAPIER LOOMS
Model  - HTV S/8J
Year 1994
Weaving width -190 cm
8 color weft insertion
Leno selvedges
At control panel dialog 1
With grosse electronic jacquard heads
Model EJP2
Year 1994
2688 hooks installed
C13 controllers

Wvng/11698/2018/05 (F)

1 SETS DORNIER RAPIER LOOM
Model -  HTV S/6J
Year 1996
Weaving width - 180cm
6 color weft insertion ‘
Leno selvedges
At control panel dialog 1
With grosse electronic jacquard heads
Model EJP2
Year 1994
2688 hooks installed

Wvng/11698/2018/05 (G)

3 SETS  DORNIER RAPIER LOOMS
Model  - HTV 6/S
Year 1995
Weaving width - 320 cm
6 color weft insertion
Leno selvedges
At conrol panel dialog 1
Split beam execution with differential
Grosse electronic jacquards
Model EJP2
Year 1994 (1)
Year 1999 (2)
5056 hooks installed

Wvng/11698/2018/05 (H)

1 SETS DORNIER RAPIER LOOM
Model -  HTVS /8J
Year  - 1994
Weaving width - 190 cm
8 color weft insertion
Leno selvedges
At control panel dialog 1
With staubli lx 3201 jacquard
Year -  2002
6144 hooks installed
Jc5 controller

Wvng/11698/2018/05 (I)

2  SETS DORNIER RAPIER LOOMS
Model -  HTVS/8J
Year - 1994
Weaving width  - 190cm
8 color weft insertion
Leno selvedges
At control panel dialog 1
With staubli lx 3201 jacquard
Year - 2003 (1)
Year - 2001 (1)
5120 hooks installed
Jc5 controllers

Wvng/11698/2018/05 (J)

1 SETS DORNIER RAPIER LOOM
Model -  HTVS/6J
Year - 1994
Weaving width - 180 cm
8 color weft insertion
Leno selvedges
With staubli lx 1600 jacquard
Year -  2002
2688 hooks installed
Jc5 controller

Wvng/11698/2018/05 (K)

1 SETS DORNIER RAPIER LOOM 
Model -  HTVS/6J
Year - 1994
Weaving width - 190cm
8 color weft insertion
Leno selvedges
At control panel dialog 1
With staubli cx jacquard
Year - 1994
5120 hooks installed
Jc 4 controller

Wvng/11697/2018/05

1 SET YAMADA SINGLE-END SIZING WINDER
Model  YS-6,  Year 1989    

Main features
Individual motor driving
Prompt drying system with double-reel system
Heat air circulation device
Permeable sizing device, Squeezer 
No. of Spindles        20
M/C dimensions       8,860mm (L) x 850mm (W) x 1,750mm (H)
Winding Speed        Stepless speed controller,  150-350m/min.
Max. Winding dia.    280mm
Take-up tube           Paper tube,  85mmdia. x 180mm    
Take-up style          Cheese (5, 6 inches) or flange bobbin
With                         Press roller squeezer
                                Full bobbin stopper
Heating source        Steam 
Power                      winding motor, 60w x 20
                                yarn setting motor,  6w x 20
                                solenoid motor,  8.8w x 20
                                steam heater  30kw
                                with size temp. auto control device
                                other motors,  1.50kw, 40w, 100w, 1kw x 1 each

Wvng/11696/2018/05

1 BENNINGER SECT. WARPER MOD.ERGOTRONIC MACHINE
Yoc - 1995
W.Width -  2200 mm
Beam circumference -  2540 mm
Cone length  - 1050 mm
Ratio -1/5,
Beams flange dia. - 800-1000 mm
Volts, - 380/400
With pressing device, beaming unit,

Sold with:
Benninger Bensplitz Reeds - 2.
Benninger Trolley opening Creels -  2
Positions each - 640
Gauge  -  240 x 240 mm.

Wvng/11695/2018/05

08 SETS SECOND HAND SULZER MODEL G6200 N6 SP G1 WEAVING MACHINES
Yoc : 1994
Working width 2200mms
Colours – 08
Staubli dobby model -  2660 (16 shafts)

04 SETS SECOND HAND SULZER  MODEL G6100  N6 SP G1 WEAVING MACHINES
Yoc -  1992
Working width  - 1900mms
Colours – 06
Staubli dobby model  - 2660 (16 shafts)                  

10 SETS SECOND HAND SULZER MODEL G6100 B200 N6 SP G1WEAVING MACHINES
Yoc - 1988
Working width - 2000mms
Colours - 06
Staubli dobby model  - 2660 (16 shafts)

Each of the 22 machines equiped with:
Heald frames  - 10
Heald wires and drop wires  - 6000
Weft accumulator heads -04
Warp beam - 01
Take up roller - 01

Wvng/11694/2018/05

11 SETS PICANOL GAMMA RAPIER LOOMS
5 x GAMMA-4-R-190cm                               
Construction year 2000, with electronic dobby STAUBLI 2622, 12 levers installed.
6 x GAMMA-2-P-190cm
Construction year 2002, with cam box STAUBLI 1620B, 7 levers installed, with Ldec.

Equipped with :
Sumo, ELO, ETU, 2 weft colours, Eltex weft detection,
2 weft feeders ROJ Chrono with bobbin stand and electrical command box ROJ,
6 heald frames Verbrugge DRC2 for 13” heddles,
6000 healds, 6000 droppers,
Grob warp detection with 6 warp stop motion bars, 
2 warp tension rolls with spring-system right and left,
1.5 warp beams Ø 1100mm, 1 batching motion PBM-1 with weavers’ walking floor,
1 weavers step, 1 waste dustbin, electrical waste cutters right and left, Elsy right and left.
                       
Special offer including following extra spare parts in the lot of 11 rapier looms :
10 x heald frames DRC2 for 13” heddles
2 x ELSY
1 x ELO motor
1 x TSF warp tension sensor
2 x electrical waste cutter motor
4 sets of templets 20 pins
5 sets of DIN beam adapters

 

Wvng/11693/2018/05

8 SETS SUPER EXCEL LOOMS
Yom : 2004
Working width : 190cm
Fimtextile Dobby
Max. 20 Shafts, equipped over 18
8 Color, 3 Feeder
12 Healdframe
1.5 warp Beam, Cloth Roll
4,000 Healds, Droppers

Wvng/11692/2018/05

8 SETS SULZER G 6300 TEXTIL RAPIER LOOMS
Year  2003
Working width : 190cm
4 Color Weft selection
Staubli Positive Electronic Dobby
Model 2670
16 Shaft installed                   
Leno Selvedges
Electronic Let off 1000mm diameter
Electronic Take up
Off Loom Alexco Take up with Inspection
Each loom with
1 Warp Beams
8/10 harness frames
4 ROJ Chrono HS Weft feeders

Wvng/11691/2018/05

NO. 1 SECTIONAL WARPER BENNINGER ERGOTRONIC 
Year 1997
Width 220CM, Pressing Device,
Waxing unit, Beaming unit, 
Benninger Leasing Device BEN SPLIT
With BENNINGER CREEL , 560+560 position with electronic yarn tension control,
Pitch 270 mm x 270 mm. 
Status running in top conditions

Wvng/11690/2018/05

8 SETS VAMATEX MODEL P1001 ES 
Year  - 1995/96
Working width -  230 cms
Dobby fimtessile
Machine working

Wvng/11689/2018/05

02 SETS BENNIGER SUPERTRONIC WARPER MACHINE
Yoc : 1991
Drum -220cm
Dia beam - 1000mm
Oilier device – antistatic mechanical
8 Sec. Leasing
Creel : 35x8 = 280+280 =560
Horizontal creel with trolley
Double tensioner
Double Creel
Pitch 240

Wvng/11688/2018/05

NO 1 SECTIONAL WARPER BENNINGER MODEL ERGOTRONIC
Year 1997
Width 220cm
Leasing Device Ben Split, waxing device.
With Benninger Creel automatic yarn tensioner,
560+560 position reverse panel, pitch 270cm x 270cm

Wvng/11687/2018/05
3 PCS. SULZER PU 183 ES 110 E10 D1
Cam motion, under motions installed: 6 pcs.
Single colour machines, with differential for running split beams, 
Double whip roller,
1 weft feeder, 6 heddle frames, 
3 half warp beams Ø 800 mm, 
On loom cloth roll winding, 1 cloth roller.
Including center tucker. 

Wvng/11686/2018/05

16 SETS SOMET MASTER AND N. PIGNONE / SMIT LOOMS

NO 1 SOMET MASTER SM 93
WW 230 cm
Year - 1989,
Staubli dobby 2232 S-20 levers installed
Colour -8
S8 heald frames,2
Weft feeders1 beams,1 cloth roller,heddles and dropper as installed

NO 2 SOMET MASTER SM 93
WW 210 cm
Year - 1989,
Staubli dobby 2232rs, -20 levers installed
Colours - 8
8 heald frames,2 weft feeders
1 beams, 1 cloth roller, heddles and dropper as installed

NO 5 SOMET MASTER SM 93
WW 190 cm
Year -1988/89
Staubli dobby 2232 s -20 levers installed
Colours-8
8 heald frames
2 weft feeders 1 beams,1 cloth roller,heddles and dropper as installed

NO 5 SOMET MASTER SM 92
WW 190 cm
Year - 1986/87
Staubli dobby 2232 s- 20 levers installed
Colours -8,       
8 heald frames,
2 weft feeders
1 beams,1 cloth rollers, heddles and dropper as installed

NO 2 NUOVO PIGNONE FAST P
WW 200 cm
Year -1991 ( mecanical let off and mecanical take up)
Staubli dobby 2660rs – 20 levers installed
Colours -8
8 heald frames,2 weft feeders
1 beams ,1 cloth rollers, heddles and droppers as installed

NO 1 SULZER G 6300
WW 220 cm
Year – 2003,
Staubli dobby 2668 ksy – 20 levers installed
Colours - 8,
8 heald frames, 2 weft feeders

NO 1 X BEAMS LOADER
NO 1 X KNOTTING MACHINE TITAN WITH TROLLEY WW 220
NO 1 X MINI WARPING MACHINE
NO 1 PUNCHING MACHINE
(Included spare parts available)
Machines currently running

Wvng/11685/2018/05

1 PCS. SULZER TW11 213 ES 105 E6 F D12

Converted into dobby loom, equipped with Staubli KR2 dobby,
With SFV device (Stepping paths device = first two levels cam motion 1:1, other dobby lever positions free programmable),
10 levers installed, single colour,
With differential for running split beams, 
Double whip roller, 1 weft feeder, 6 heddle frames, 
3 half warp beams Ø 800 mm, 
Neuenhauser big roll batcher, 
No center tucker. 

The loom is in exceptional nice condition

 

 

Wvng/11684/2018/04

5 SETS DORNIER PTV 8/S FOR GLASS FIBER
Year: 2004,
Width : 360 cm
REINFORCED MACHINE FOR GLASS FIBER
8 colours
2 beams per loom;
Dobby type : STAUBLI 2668/2 with 28 shafts installed
14 levers ; 4 healded frames;
Special Batcher designed for GLASS FABRICS and others sensitive fabrics,
Pressing system with chrome steel rollers.
Fantastic condition, machines are running at 150 rpm

Wvng/11683/2018/04

16 SETS TSUDAKOMA ZAX-N WEAVING MACHINES
Year - 2008,
Width - 380cm,
With Stäubli cam 1651,
6 heald frames,
2 weft accumulators,
Side tucking, center tucking,
Possible to weave 2 x 175 cm or 1 x 280cm – 370cm,
With batching motion
Status: running

Wvng/11682/2018/04

TOPMATIC WARP TYING STAUBLI's MACHINE TYPE TPM PC-201 
Year:  2006
With 85" Length Frame
Model TPM 201 PC was mainly tying 100% cotton yarns.
With its multiple options in terms of knot formation,
Even textured and elastic yarns may be tied.
Processing staple fibre and filament yarn counts ranging from 0.8 to 500 tex on the same machine without time-consuming adjustments
It has accomplished its work.

02 SETS TODO's UNIVERSAL WARP TYING MACHINE TYPE KN-10
Tying System: Portable System or Stationary System
Type of Tying Head: KN-10 (for general warps)
Year 1989 & 1990
Range of Yarn Count:100s - 10s/8, 20d - 4,000d
Tying Speed:100 - 600 knots/min
Warp Combination to be tied: Woven-off warp to new warp in following ways,
    lease to lease / sheet to sheet
    lease to sheet / sheet to lease
Motor: Single Phase, AC 100V, 50W
Type of Knot: Single Dog Knot and Double Dog Knot
With Tying Frame: 85 type and 95
Workable Reed Space: 85 and 110-inches
Height of Warp Line:810mm - 990mm (standard)

Wvng/11681/2018/04

NO 08 SOMET MASTER SM93 LOOMS
With Year 1998/89
With 8 colors
2 machines with Socos 
With Mechanical Staubli Dobby 2232  20 levers
Various width 190(4)/ 210 (2) /230 (1)

NO 05 SOMET MASTER SM92 LOOMS
Year 1986
Width : 190cm  
With Mechanical Staubli Dobby 2232 20 levers
With Control panel type 93
With 1.5 beam
10 Heald frames 
1 or 2 weft feeders with creel
With 1 cloth roll

Wvng/11680/2018/04

16 SETS SOMET ALFA LOOMS
Width : 190cm,
Color :8
Yom :2003-4-5
Jacquards are staubli CX880-1344 hooks and jc 5 controller

Accessories:
4 weft feeder
1,5 warp beam
1,5 fabric roller
5000 dropper
Harness 60 ending per cm
1 gantry for 2 loom
Running condition

Wvng/11679/2018/04

40 SETS TSUDAKOMA ZAX 9100 AIRJET LOOMS
Year : 2007
Reede width : 230cm
Nozzles : 2
Weft Accumulators : 2
Pieces heald frames : 4-6
Pieces Warp beam : 1
Warp beam Dia : 800mm
Model of dobby : 1661
Shaft capacity of the dobby : 8
Shafts & levers : 8
Wires & dropper : 7000-8000
Stop motion bar : 6
Situation : stop

Wvng/11678/2018/04

09 NOS. AIRJET  TSUDAKOMA MODEL 9100 AND 03 NOS. MODEL MODEL ZAX E LOOMS

NO 09 SECONDHAND AIRJET TSUDAKOMA MODEL ZAX 9100 LOOMS 
Year 2007
Width 210cm (7machines) with Electronic Stuabli  dobby 2881
Width 230cm (2 machines) with Electronic Staubli Dobby 2871
16 levers
With Navigation Panel
With 4 colors (6 machines)
With 6 colors ( 2 machines)
With 8 colros ( 1 machine) special machine

With accessories
4 weft feeders TSK with Creel
One machine with 8 feeders.
With 10 Heald Frames
With Batching Device
With 1.5 beams
With Droppers and Heddles
380v 50hz
Machines running in mill

NO 03 SECONDHAND AIRJET TSUDAKOMA MODEL ZAX E LOOMS 
Year 2004
Width 230cm
6 colors loom
With ELectronic Staubli Dobby 2871
16 levers
With 10 Heald frames
With Weft feeders 4 with creel
With Navigation System.
with 1.5 beams
With Batching Device
Complete with droppers and heddles
380v 50hz

Wvng/11677/2018/04

NO.01 KARL MAYER SAMPLE WARPING MACHINE MODEL ROM ROT-O-MATIC
Year of construction 1999
Double beaming for beam flanges up to 1.000 mms diameter
Rotary creel 12 positions
Fixed crell 14 positions
Maximum warp speed 1.000 mt/min.

Wvng/11676/2018/04

NO.01 SUZUKI SAMPLE WARPING MACHINE MODEL NAS 2000 
Year of construction 1990
Working widht 2000 mms
Beamer for beam flanges up to 800 mms diameter
Fixed crell 8 positions
Maximum warp speed 700 mt/min.

Wvng/11675/2018/04

13 SETS SULZER RUTI G6200 LOOMS

9 SETS SULZER RUTI MODEL G6200
Working width : 220cm N6 SP 
Year : 1995/96

Equipped with:
6 Colours
Eletronic Dobby STAUBLI 2672 / 2662 RS with 16 levers
12 Heald Frames
4 Weft Feeders SAVITEC PENTA / IRO
1.5 Warp Beams
1.5 Cloth Roller
4.000 Droppers & Healders

4 SETS SULZER RUTI MODEL G6200
Working width : 220cm N6 SP  
Year : 1995/96

Equipped with:
6 Colours
Electronic Dobby FIMTESSILE RD830 with 16 levers
12 Heald Frames
4 Weft Feeders SAVITEC PENTA / TECNOMATEX
1.5 Warp Beams
1.5 Cloth Roller
4.000 Droppers & Healders

Machines in very good condition

Wvng/11674/2018/04

1 SUZUKI NAS-10S SAMPLE WARPING MACHINE
Year: 1991
Working Width: Max 2,500 mm
Warping Yarn Speed: 200 ~ 900 m/min
Working Length: 10 ~ 90 m
Number of Yarn: 10 colors
Kinds of Yarn: Wool, Cotton, Synthetic, Silk and Various kinds of Yarn
Warp Density: Min 4 ends / cm  Max As desired depending on the kinds of Yarn
Automatic Stopping Completion System: Beam
Machine Controls:  Touch-Panel automatic 
Voltage: 200 V
CREEL STAND
10 Bobbins Creel with Tension Dropper Device
Automatic Yarn Color Selecting Device
Tension Adjusting Device
Miss-Catching Stopping Device
Automatic Stopping Device for Yarn Snapping
BEAMING DEVICE
Warp Beam Direct Winding System
Beam Flange: 1,000 mm dia
Beam Length: 3,300 mm max
Main Power: 1.5 kw
OPTION
Rotational Creel 4 heads.....  Included

Wvng/11673/2018/04

16  SETS PICANOL GTX WEAVING MACHINES
Weaving width : 190cm
Year : 1994
Dobby Staubli  2660  20 levers installed
4 Colour machines , 3 weft feeders.
Warp beam :1.5 per machine
Cloth roll  :1.5 per machine
Heald Frame :10 per machine
Heddles  :5,000 per machine
Dropper  :5,000 per machine
Mechanical take up
Mechanical let-off

All machines in running condition

Wvng/11672/2018/03-A

12 SETS PICANOL OMNI-PLUS 800 MACHINES
Yoc : 2006/2007
Width : 220cm
Staubli 1661 cam
2 Colour
Heald frames 4 Pcs
1.5 beam with 1000mm/1.5 cloth roller
2 Nozzles/2 weft feeders
Electric Voltage 380V and 50 hz
Just stopped on the mill floor
Test Run complete ok

Wvng/11672/2018/03-B

12 SETS PICANOL OMNI-PLUS 800 MACHINES
Yoc : 2006/2007
Width : 220cm
Staubli 1661 cam with 6 levers installed
4 Colour
Heald frames 6 pcs
1.5 beam with 1000mm/1.5 cloth roller
4 Nozzles / 3 weft feeders
Electric Voltage 380V and 50 hz
Just stopped on the mill floor,
Test run complete ok

Wvng/11671/2018/03-A

01 DORNIER HTV6/SD RAPIER LOOM
Year of construction 1995,
Nominal working width 2000mm, 6 colours,
Electronic Staubli dobby 2667 for max. 28 shafts / 14 levers installed,

Equipped with :
3 weft feeders 
12 heald frames
1 cloth roller
2 beams Ø 400 mm, AT1 panel

Wvng/11671/2018/03-B

02 DORNIER HTV4/SD RAPIER LOOMS
Year of construction 1993,
Nominal working width 2000mm,
4 colours, 
Electronic STAUBLI dobby type 2667 for max. 28 shafts / 12 levers installed,

Each equipped with :
3 weft feeders 
12 heald frames
1 1Ž2 cloth roller
2 beams Ø 400 mm, AT1 panel

Wvng/11670/2018/03 - A
31 SETS SOMET EXCEL LOOMS 
Yom : 1999
Working Width : 190cm,
2668 dobby with 16 Shafts,
2668 dobby with 20 Shafts,

Accessories :
4-5 feeders , 8 frames,
1.5 warp beams(800mm)
1.5 cloth beams
Staubli 2668 dobby with 16-20 Shafts,
Stop in factory was running with shirting, now Stop in factory
Delivery: April 2018

Wvng/11670/2018/03 - B
18 SETS SOMET EXCEL LOOMS
Yom : 1996
Working width : 190cm
10 sets, Staubli 2612 dobby with 12 Shafts
8 sets, Staubli 2660 dobby with 16 Shafts

Accessories : 
6 feeders , 8 frames,
1 warp beams, 1.5 warp beams (800mm)

Was running on shirting, now Stop in factory

     

Wvng/11670/2018/03 - C
24 SETS SOMET SM93 LOOMS
Yom : 1996,
Working width : 280cm,
2 feeders, 6 frames,
1 warp beams, 1.25 warp beams (800mm),
Staubli 2212 dobby,
Running on white cloth

Wvng/11669/2018/03

NO.10 SECOND HAND DORNIER MODEL HTVS6/S LOOMS        
Year of construction 2000
Working width 2300 mms
6 colours
Fimtessile dobby model RD860S (20 shafts)
Lateral tucking units
Staubli name seldvage jacquard

Each machine equipped with :
16 heald frames
02 warp beams with flanges diam.800 mms
02 take up roller
04 weft accumulator heads
5.000 heald wires and drop wires

Machines are in perfect conditions still working in the factory

Wvng/11668/2018/03

12 SETS SECONDHAND DORNIER MODEL HTVS 6/S WEAVING MACHINES
Years 1999/2000
Width 230cm
Dialog Panel AT2 – electronic dobby with 20 shafts fitted
Electronic Warp Let Off(EWL)
Electronic cloth Take UP(ECT).

Each Loom equipped with:
14 Heald Frames
4 weft feeders
5 ECS (electronic color selector)
1 set of Left and Right Tuck-in device
1 Selvedge Name Jacquard STAUBLI
2 Beams
2 Cloth Rollers
Heddles and Droppers as on the machines

Wvng/11667/2018/03
14  SETS SULZER G6500 WEAVING LOOMS
Year 13x2008,1x2011
Nom. Width 200 cm
With top beam equipment
8 weft insertion colours
With STAUBLI electronic dobby
24 shaft drives

Accessories:
8 weft accumulators,
14 heald frames,
6.000 heddles and droppers,
1,5 warp beams, 1.5 cloth rolls

6 SETS SULZER G6500 WEAVING LOOMS
Year 2011
Nom. width 200 cm
8 weft insertion colours
With STAUBLI electronic dobby
20 shaft drives

Accessories:
8 weft accumulators,
14 heald frames,
6.000 heddles and droppers
1,5 warp beams, 1.5 cloth rolls

Wvng/11666/2018/03
WEAVING MACHINES

3 SETS SULZER EAVING MACHINES G 6100
Type N4SPQG1M
Year  1990
Nom. width 190 cm
Top beam equipment
4 weft insertion colours
With STAEUBLI electronic dobby
Type 2660
24 shaft drives

Accessories per machine:
4 weft accumulators, 1 yarn creel,
5 drop wire bars, 6 heald frames,
3.000 heddles and droppers,
3 warp beams, 1.5 cloth rolls

1 SET VAMATEX SILVER MACHINE
Type HS
Year 2008
Nom. width 190 cm
Top beam equipment
4 weft insertion colours
With STAEUBLI electronic dobby
Type 2861/2
20 shaft drives


Accessories:
4 weft accumulators,
1 yarn creel, 5 drop wire bars,
6 heald frames,
3.000 heddles and droppers,
2 warp beams, 1.5 cloth rolls

2 SETS VAMATEX SILVER MACHINES
Type HS
Year 2007
Nom. width 360 cm
1 machine with top beam equipment
8 weft insertion colours
With STAEUBLI electronic dobby
Type 2670 B/2
20 shaft drives

Accessories:
4 weft accumulators, 1 yarn creel,
4 drop wire bars, 4 heald frames,
4.000 heddles and droppers,
2 warp beams, 1.5 cloth rolls,
2 semi warp beams (bottom)

2  SETS  VAMATEX SILVER MACHINES
Type HS
Year 2007
Nom. width 220 cm
1 machine with top beam equipment
4 weft insertion colours
With STAEUBLI electronic dobby
Type 2861/2
20 shaft drives

Accessories:
4 weft accumulators, 1 yarn creel,
5 drop wire bars, 6 heald frames,
3.000 heddles and droppers,
2 warp beams, 1.5 cloth rolls, 2 warp beams

Delivery will be May 2018.
Five more identical SULZER machines will be available by end of the year.
Machines still running in Switzerland

Wvng/11665/2018/03

SULZER P7100-PU AND TW11 LOOMS
8 SULZER P7100 B390 N1-1 EP R D1
5 x 1990 2 x 1993 , 1x 1995, 10 levers installed

Accesories:
2 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , NO TLL

4 SULZER P7100 S330 N1-1 EP D1
Yoc : 1993 , 6 levers installed,

Accesories:
1 prewinder ,1.5 cloth rollers , 1.5 beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires

8 SULZER P7100 B 280 N1-1 EP D1
Yoc : 1997 , 6 levers installed

Accesories:
1 prewinder ,1.5 cloth rollers , 1.5 beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires

18 SULZER P7100 B360 N1-1 EP D1
Yoc : 1989-1990 , 10 levers installed,

Accesories:
2 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , NO TLL

14 SULZER P7100 B360 N1-1 EP D1
Yoc : 1993, 10 levers installed

Accesories:
2 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , 1 TLL

14 SULZER P7100 B390 N1-1 EP R D1
Yoc : 1992 , 10 levers installed,

Accesories:
2 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , 1 TLL

10 SULZER P7100 S390 N2 EPQ D1
Yoc : 1996 , 10 levers installed

Accesories:
2 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , 1 TLL

4 SULZER P7100 S390 N1 EP D1
Yoc : 1991 , 10 levers installed

Accesories:
1 prewinders ,1.5 cloth rollers , 1.5 warp beams , 1 cloth roller,
6 heald frames 8000 droppers and heald wires , 1 TLL

PU & TW 11 LOOMS
8 SULZER PU B 280 ES 110 E 10 D1
Yoc : 1984-85 , 6 levers installed

Accesories:
1 prewinder ,1.5 cloth rollers, 1.5 beams
6 heald frames 8000 droppers and heald wires

5 SULZER PU B 153 ZSD 110 KR D1 R
3 X KR1 18 LEVERS AND 2 X KR2 12 LEVERS
Yoc : 1982

Accessories per loom:
2 prewinders ,1.5 cloth rollers , 3 half warp beams ,
10 heald frames 8000 droppers and heald wires , 1 TLL,12 levers installed

2 SULZER PU B 390 ES 110 E 10 D1
Yoc : 1984-85, 6 levers installed

Accesories:
1 prewinder ,1.5 cloth rollers , 1.5 beams ,,
6 heald frames 8000 droppers and heald wires

4 SULZER TW11 B 390 ES 110 E 10 D1
Yoc : 1984-85, 6 levers installed,

Accesories:
1 prewinder ,1.5 cloth rollers , 1.5 beams
6 heald frames 8000 droppers and heald wires

2 SULZER TW11 B 330 ES 110 E 10 D1
Yoc : 1984-85 , 6 levers installed

Accesories:
1 prewinder ,1.5 cloth rollers , 1.5 beams ,,
6 heald frames 8000 droppers and heald wires

Wvng/11664/2018/03

8 SETS SULZER P7100 N4 EP R D1
Width : 390cm
Cam box;10 capacity
4 color
  
Accessories;
6 healdframe
1,5 warp  beam (1000mm dia) and split
1,5 cloth roller
1 weft feeder
10000 headler and dropper

Right and left tuck-in available but no centre tuck-in
Running condition

 

 

Wvng/11663/2018/03

6 PCS. P7100 B 390 N1-1 EP D1
Cam with 10 Shaft loaded.
 
Accessories per machine
1 Cetnral TLL 110”
6 Heald Frames
1 Weft Feeders
3 Split Beams
2 Cloth Rolls
100% projectile and guides
10000 Heddless and Droppers
 
Wvng/11662/2018/03

20 SETS SULZER TW11 LOOMS
Yom: 1969-1979
Width :280cm,cam motion,
Single color

Accessories;
1 weft feeder
6 healdframe
1,5 warp beam
1,5 fabric roller
5000 dropper
5000 headler

Running condition

Wvng/11661/2018/03

8 PCS LEONARDO SILVER HS MACHINES
Year : 2006
Width : 360cm.
With staubli cx 870 jc 5 2688 hooks
1.5 roller, 1.5 beams , 9000 droppers, 4 iros

4 PCS LEONARDO SILVER HS MACHINES
Year : 2007
Width :340cm.
With staubli dx 100 jc 6 2688 hooks
1.5 roller, 1.5 beams , 9000 droppers, 4 iros

6 PCS SOMET ALPH MACHINES
Year : 2005
Width :340cm

Equiped with :
2 xstaubli cx 880 jc5 electronic jacquards for 2688 hooks and 4 x staubli lx 1600 for 3072 hooks
2 beams, 2 rollers, 6 iros , 12000 droppers

2 PCS SOMET ALPHA MACHINES
Year :2007
Width: 340cm

Equiped with :
Bonas s600 electronic jacquards for 2688 hooks and
2 beams, 2 rollers, 6 iros , 12000 droppers

8 PCS SOMET S. EXCEL MACHINES
Year : 2003
Width :360cm
Staubli 2668 electr. Dobby for 20 levers
1.5 roller, 1.5 beams , 9000 droppers, 4 iros, 12 frames

Wvng/11660/2018/03

2 SETS SULZER P7300HP S540 N4 SP D12 R

Year : 2007/8
Staubli 2664 dobby
4 weft feeders Type Iro Chrono X2 M 4 for  Sultex Can Bus with power control box
4 color version with 4 electronic filling brakes PP version
Set of Projectiles for full width
1 set of double temples with pressure from the top
1 set of tuckers left and right hand side
Fabric support plate for full width
6 contact bars
6 heald frames
1 set of split warp beam version Q4
No off loom take up included

 

Wvng/11659/2018/03

06 SETS NUOVA PIGNONE TERRY DOBBY LOOMS
Yom : 1995 – 04 Set
1996 – 02 Set
Width : 360cm
8 Color
Staubli electronic dobby 20/16

Accessories;
2 weft feeder
16 healdframe
1,5 warp beam
1,5 fabric roller
7000 headler
7000 dropper

Running condition

Wvng/11658/2018/03

SOMET EXCEL DOBBY LOOMS
Yom : 1995
Width : 360cm,
8 Color
Fimtextile electronic dobby 16 shaft

Accessories; 
4weft feeder
10healdframe
1,5 warp beam
1,5 fabric roller
8000headler
8000 dropper

Running condition  

Wvng/11657/2018/03

SCHONHERR CARPET WEAVING LOOM

Type : Alpha 300

Width : 4000mm

Red density 320 D/M

Year : 2003

Speed : 140 picks/min

Voltage : 380 V – 50 Hz
Prewinder : 2 x ROJ
Beam stand : 4 beams – low beam stand
Shaft motion : Electronic dobby for 12 shafts
Jacquard type : 1 Staubli Jacquard model : LX2490 (6720 Hooks X 1)
+1 Staubli Jacquard model : LX2490 (4032 Hooks X 1)
Harness (No. of cords) for 8 colors
Creel : 8 Doors
Warp stop motion : Ground-and oil stop motion

Wvng/11656/2018/03-A

30 SETS TOYODA T710 AIRJET LOOMS
Model JA4S-190TP-EF-T710
Width : 190cm
Year 2006 (30Sets) 
4-Color Weft Insertion, 6-Shaft Cam Motion

Each loom equipped with :
1.5 Warp beam (Dia 800mm)
1.0 Cloth roller
7000 Dropper pins
7000 Heald wires (J-type 280mm)
1 STD reed lower No. 100
Electric Let off motion
Electric take up motion
Electric Source 380 V./ 50Hz

Wvng/11656/2018/03-B

16 SETS TOYODA T710 AIRJET LOOMS
Model JA4S-190DE-EF-T710
Year : 2005
Width : 190cm
4-Color Weft Insertion, Staubli 2871 Electronic Dobby
With 16 shafts, Fancy Double-Beam

Each loom equipped with :
3.0 Warp beam (Dia 800mm)
1.0 Cloth roller
7000 Dropper pins
7000 Heald wires (J-type 331mm)
1 STD reed lower No. 100
Electric Let off motion
Electric take up motion
Electric Source 380 V./ 50Hz

Wvng/11655/2018/03

13 SETS  VAN DE WIELE LOOMS
Yoc : 1989/97
Width : 175 cm
2-VMM22-175
11-VME 22-175
Staubli Dobby
4 beams/loom 1000mm beam flange diameter
2 IRO Laser, Galaxy, or Luna feeders per loom  

Machines still installed and running now

Wvng/11654/2018/03

8 SETS DORNIER HTVS12/J  LOOMS

Width : 180cm

Year : 1993/4
Staubli CX960 5120
Jacquard hooks 80%+ installed
JC4 Controller
8 color with average of 5 weft accumulators, Electronic let off
Alexco off loom take up with inspection frame
2 beams per loom
940mm beam flange diameter

Machines still installed on mill floor,
Immediate delivery, Nearest airport for inspection

Wvng/11653/2018/03

12 SETS PICANOL GAMMA WITH SUMO MOTOR MACHINES
Year 2000.
Model : Gamma-220-6R -6 Sets sumo
Gamma 190-6R -6 Sets sumo
Staubli electronic 2670 dobby
16-20 installed
4 color use
Electronic let off
Electtonic take up
Temple type
3 weft feeder
12 heald frame
1.5 warp beam
1.5 cloth roll
6000 heddle / dropper wire
02 leno bobbin
220 volt
Inverter control with sumo only

Condition excellent running

Wvng/11652/2018/02-A
01 PICANOL OMNI-4-R AIRJET WEAVING LOOM
Year of construction 06/2001,
Working width 2200mm,
4 weft colours installed, electronic STAUBLI dobby type 2871 with 16 levers installed (= maximum),

Equipped with :
ETU and ELO motor, 4 weft accumulators 2231,
Creel for 4 colours, 1 warp beam Ø 1000mm, 6 heald frames 13” C,
3000 healds, 3000 droppers, external batching motion but without the batching motion,
Grob warp detection with 5 warp stop motion bars,
Double warp tension roll with easing motion R & L ,
Double pressure roll, R&L support for selvedge split bobbins,
Waste dustbin, Weaving step.

Wvng/11652/2018/02-B
01 PICANOL OMNI PLUS-SUMMUM AIRJET WEAVING LOOM
Year of construction 02/2016,
Working width 2200mm,
4 weft colours, with  STAUBLI cam bow type 1781A with 9 levers installed (can be increased to 
max.11 levers),

Equipped with :
1 beam diameter 800mm, 1 cloth roller,
2 warp tension rolls, easing-motion, sumo motor,
4 weft accumulators IRO BLUE 22 EASY SET (with balloon breakers and internal PFT),
PRA, creel for 4 bobbins with 4 IRO TFE-8 detections,
Weft stand, BLUE platform (Ldec), Groz-Beckert warp detection with 6 warp stop motion bars (R
and L detection),
R and L leno-devices (driven by electronic step-motors), foreseen for ELSY but without,
led light bar, 4 heald frames DRC30 GTP Hybrid 158 type “13”  J, touch screen.

Wvng/11652/2018/02-C

02 PICANOL OMNI-F-4-J AIRJET WEAVING LOOMS
Year of construction 1996,
Working width 2200mm, 4 colours,
Jacquard STAUBLI CX880 for 1408 hooks all the hooks installed, JC 4 controller,

Each loom equipped with :
2 warp beams Ø  1000mm Q2, 4 weft accumulators IRO type 1132,
6 warp stop motion bars, 7.000 droppers,
Cone creel for 2x4 positions, pre-equipped to work with batching motion but without the batcher.
Modules replaced in 2010 – M4,
Harness W10/8T1WA1/H/01 Year of construction 2010
Harness W05/8J1NA1/H/01  Year of construction 2005

Wvng/11652/2018/02-D

01 PICANOL OMNI PLUS 6-P AIRJET WEAVING LOOM
Year of construction 2002,
Working width 2200mm, 6 colours,
STAUBLI cam box type 1751A  with 6 levers installed,

Equipped with :
4 weft accumulators 2231P, 1 warp beam,
Pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 13” J, 5 warp stop motion bars,
Double warp tension, single pressure roll.

Wvng/11652/2018/02-E

02 PICANOL OMNI PLUS 6-R AIRJET WEAVING LOOMS
Year of construction 2000,
Working width 2200mm, 6 colours,
Electronic STAUBLI dobby type 2871 With 6 levers installed,

Each equipped with :
4 weft accumulators 2231P,
1 warp beam, pre-equipped for batching motion but without batching motion,
4 heald frames SCHMEING 13” J, 5 warp stop motion bars,
Double warp tension, single pressure roll. (loom 247366 also has L&R Tucking units)

Wvng/11652/2018/02-F

02 PICANOL OMNI PLUS-4-P AIRJET LOOMS
Year of construction 2000,
Working width 2200mm, 4 colours,
STAUBLI cam box type 1761 A with 9 levers installed,

Each with:
4 heald frames for heddles 13” C DRC2, 4 warp stop motion bars,
5.000 healds & 5.000 droppers, ELSY L&R, 4 weft accumulators type 1131,
Without cloth roller, 1 warp beam diameter 1000mm, without QSC

Wvng/11652/2018/02-G

05 PICANOL OMNI PLUS-F-2-P AIRJET WEAVING LOOMS
Year of construction  08/2001,
Working Width 2200mm, 2 colours,
With STAUBLI 1661 with 4 / 6 levers installed (max. 8 levers possible)           

Each loom equipped with  :
SUMO motor, ELO, ETU,  2 weft accumulators Picanol 1131plus,
1 weft stand, 1 vertical creel for 2 bobbins,
2 warp tension rolls Ø 120mm driven by easing motion right and left,
With KASUGA warp detection, 4 heald frames Steel Heddle Hybrid Power 158 DRC2  13” type C,
LENO-device right and left, electrical waste cutter right, 1 warp beam,
4 looms with 1 cloth roll and 1 loom with external batching motion, display, Walking step.

Wvng/11652/2018/02-H

01 PICANOL OMNI PLUS-2-P AIRJET WEAVING LOOM
Construction date 07/2003,
Working width 2200mm, 2 colours, with STAUBLI 1761A with 8 levers installed (=full).

Equipped with  :
SUMO motor, ELO, ETU, 2 weft accumulators Picanol 1131,
1 weft stand, 1 vertical creel for 2 bobbins,
2 warp tensions roll diameter 120mm driven by easing motion right and left,
With KASUGA warp detection,
4 heald frames Steel Heddle Hybrid Power 158 DRC2  13” type C,
LENO-device right and left, electrical waste cutter right,
1 warp beam diameter 800mm , mini-batching motion Neuenhauser, display, walking step.

Wvng/11651/2018/02
24 SETS PICANOL OMNI-PLUS 800 MACHINES
Yoc : 2006
Width 220cm
Staubli 2871 dobby
4 Nozzles
10 heald frames
4 Weft feeders
1.5 beam/cloth roller
Running in the mill floor

Wvng/11650/2018/02
48 SETS PICANOL OMNI-PLUS MACHINES
Yoc : 2002/2003
Width : 220cm
Stsubli 2871 dobby
4 nozzles
10 Healdframes
4 Weft feeders
1.5 Beam/cloth roller
Running in the mill floor

Wvng/11649/2018/02
12 SETS PICANOL OMNI-PLUS 800 MACHINES
Yoc : 2006/2007
Width : 220cm
Staubli 1661 Cam
Healdframes 4 pcs
1.5 beam with 1000mm/ 1.5 cloth roller
2 Nozzles / 2 weft feeders
Just stopped on the mill floor, Test Run complete Okay

12 SETS PICANOL OMNI-PLUS 800 MACHINES
Yoc : 2006/2007
Width : 220cm
Staubli 1661 cam with 6 levers installed
Healdframes 6 pcs
1.5 beam with 1000mm/ 1.5 cloth roller
4 Nozzles / 3 Weft feeders
Just stopped on the mill floor, Test run complete Okay

Wvng/11648/2018/02
4 VAMATEX LEONARDO DYNA TERRY LOOMS
Width : 2,60M
Year :  2006
Note: Loom with New Gripper R9500

Equipped with:
8 Colours
Electronic Jacquard STAUBLI DX100  Year 2007, Controller JC6, Capacity 2688 hooks
4 Weft Feeders CHRONO
1.5 Upper Beam
1.5 Down Beam
1.5 Cloth Roller
4.500 Droppers
Harness included

Machines in good condition

Wvng/11647/2018/02

10 SETS THEMA 11E LOOMS
Yom : 1994
Width : 260cm
8 Color
Staubli Electronic dobby 2612 Shaft and 12 Lever
Electronic let off and Electronic take up

Accessories :
2 Weft Feeder
1.5 Warp beam
2 Fabric Roller
12 Healdframe
10000 Headler & Dropper

 Looms are in running condition
 Delivery is immediate

Wvng/11646/2018/02

1 SUZUKI SAMPLE WARPER MODEL NAS 300
Yoc 2002,
Width 2250 mm., rotary creel 8 colours,
Fix creel 10 colours.

8 PICANOL MOD. OPTIMAX LOOMS
yoc 2007, width 1900 mm
8 colours, STAUBLI dobby type 2861,
20 shafts, Free-Fly, fittings.

Wvng/11645/2018/02

30 SETS TSUDAKOMA ZAX AIRJET LOOMS
Width : 190cm
Year : 1999 – 6 Sets
2000 – 26 Sets
2 Color
Negative Cam
Beam & Cloth roller : 1.5
Wire heald : 5000
Heald Frame : On the machine

04 SETS TSUDAKOMA ZAX 9200 AIRJET LOOMS
Width : 190cm
Year : 2014
2 Color
Negative Cam
Beam & Cloth roller : 1.5
Wire heald : 5000
Heald Frame : On the machine

06 SETS TSUDAKOMA ZAX AIRJET LOOMS
Width : 190cm
Year : 2000
2 Color
Stabuli 2871 dobby
Beam & Cloth roller : 1.5
Wire heald : 5000
Heald Frame : On the machine

Wvng/11644/2018/02

12 SETS PICANOL GAMMA LOOMS
06 Sets with Sumo
06 Sets without Sumo
Year 2000. Apr.
Model Gamma-220-6R
Staubli electronic dobby 2670
16~20 shafts
4 color used
Electronic let off
Electronic take up
Temple type
03 weft feeder
12 heald frame
6000 heddle wire
5000 dropper wire
1.5 warp beam
1.5 cloth roll
Voltage 220 V
Cotton shirts fabrics

Condition : Excellent running mill floor

Wvng/11643/2018/02

07 SETS PICANOL GAMMA  RAPIER LOOM
Yoc : 2001
W.W. 2200mm with Staubli dobby 2670 at 20 shafts installed
8 colours

Each loom is supplied of:
No.1 beams fl.800,
No. 2 cloth roolers,
Electronic let-off,
Electronic take-up,
Race GHL
Sumo motor,
Keybord,
No. 10 heald frame,
No. 5.000. hedlles,
Warp stop-motion 6 bars,
No. 5.000. droppers,
No. 4 prewinders  with creel.
Volt 380 50 Hz

Wvng/11642/2018/02

NO. 08 SECOND HAND SULZER PROJECTILE MACHINES
Model P7100 W190 N4 SP D1
Working widht 73” (1900 mms)
4 colours
STAUBLI mechanical dobby model 2035 (18 shafts fitted)

Each machine equiped with :
01 set electronic name seldvage jaquard (made in China)
03 warp beams with flanges diameter 700 mms
02 take up roller
04 weft accumulator heads
14 heald frames

Wvng/11641/2018/02

12 SETS SULZER P 7250 S 360 N4 SP D12 LOOMS
Year :  1999
Working Width : 360cm
Staubli Electronic dobby for 18 levers 4 colors
ELU, ETU, Electronic pick finding
10 Heald frames,
1.5 Cloth rollers
1.5 Warp beams,
8000 Droppers and wires
4 Weft accumulators, 1 TLL

Wvng/11640/2018/02

ΝO. 29 SOMET SUPER EXCEL LOOMS

04 SETS SOMET SUPER ECXEL
Yoc 1999 ,
Width : 2100 WW, 
Dobby Staubli type 2670 /  16 Levers installed

Each Equipped with :
4 Prefeeders LGL Progress
8 Colours,
14 Heald frames
2 Warp beams with 1000mm. flanges
2 Cloth Rollers
4000 Droppers and Heddles

25 SETS SOMET SUPER EXCEL
Yoc 1998,
Width : 2200 WW,
Dobby Staubli type 2670 / 16 Levers installed

Each equipped with :
4 Prefeeders LGL Progress,
8 Colours,
14 Heald frames,
2 Warp beams with 1000mm. flanges,
2 Cloth Rollers,
4000 Droppers and Heddles

Machines are on mill floor stopped

Wvng/11639/2018/02

24 SETS PICANOL OMNI PLUS AIRJET LOOM
Working width: 22​0cm
Year: 2002
With Staubli Dobby 2871
4 Nozzles 

Accessories to Each loom :
3 weft accumulator
8 heald frames
1 cloth roller
1 warp beam

Wvng/11638/2018/02

2 SETS SULZER MODEL G-6200 N6 SP16 LOOMS
Working width : 220cms.
Yoc 1998
With electronic Fimtessile dobby of 16 and 15 shafts, 
Electronic Let off and Take up

Each Equipped with:
8 heald frames, 4 weft feeders,
1,5 warp beams of 80 cms diametre flange,
1,5 cloth rollers, 5.000 heddles and 5.000 droppers.

Wvng/11637/2018/02

48 SETS PICANOL OMNI PLUS 800 AIRJET LOOM
Width:220cm
Year : 2007/08
4 Nozzles
With Staubli Dobby
800 RPM

​Each looms equipped with 
3 accumulators 
8 heald frames
1.5 cloth rollers
1.5 warp beams of flange dial  1000 mm​

Machine are in running conditon

Wvng/11636/2018/02

 

02 SETS SULZER RUTI P7200 N4 SP D1 PROJECTILE MACHINES
Years 1993-1997,
WW : 220cm,
4 colors,
Electronic Staubli dobby 2665 (18 shafts fitted)

Each loom with:
12 heald frames
4 weft feeders
2 beams
2 cloth rollers
Heddles and droppers

Wvng/11635/2018/02

07 SETS SECOND HAND VAMATEX LEONARDO WEAVING MACHINES
Yoc : 1999
Working Width : 1900mm
Fimitessle Electronic dobby Model 3010 (12 Shafts Fitted)
8 Colours

Each machine complete with :
1.5 Warp beams
1.5 Cloth Roller
12 Heald Frames
04 Weft Accumulators

Wvng/11634/2018/02

12 SETS PICANOL OMNI AIRJET LOOMS
Working width : 190cm  
Yoc : 1996
Upgraded in 2004 with ABB NEMA 1 INVERTER
Staubli 2580 RS Electronic dobby with 12 levers,
6 colors

Accesories:
6 Heald frames
3 Iros
1 Warp beam
1 Batching, inspecting an enrolling Or Cloth roller ( Option)
Heald wires and droppers
Stopped on Mill Floor in excellent condition

Wvng/11633/2018/02

48 SETS  SECONDHAND SULZER PROJECTILE WEAVING MACHINES MOD. P7300 B360 N2 EP D12
Yoc : 2003
18 SETS SECONDHAND SULZER PROJECTILE WEAVING MACHINES MOD. P7300 HP B360 N2 EP D12 R
Yoc : 2006
 
Each machine equipped with:
2 filling feeders IRO Luna with creel
1.5 warp beam sets, 1000mm dia.
10 Harness frames
cam box with 10 drives & 10 under motion
9000 heddles & droppers
3/1 cams installed
1 off loom take up Grob with vertical inspection

Wvng/11632/2018/02

 

NO. 02 SECOND HAND SOMET MODEL SUPER EXCEL LOOMS
Yoc : 1998
Working width : 2100mms
8 Colours
Electronics Staubli Jacquard Model CX880 (2688/2400 Hooks ) Controller JC5 Each

Machine Complete with :
1 Harness 9600 Ends
1 Warp Beam flanges 800mm
02 Cloth roller
04 Weft accumulator LGL

Wvng/11631/2018/02

31 SETS TSUDAKOMA AIRJETS WEAVING MACHINES
 Model : 10xZA203, 250cm, 4xZA205, 250cm
4xZA205i, 250cm, 3xZA203, 280cm
2xZA205i, 280cm,  2xZA205,330cm
2xZA205i, 330cm 4xZAX, 330cm
Yoc : 1987-2000
Working width : 250cm – 18 machines
280cm – 05 machines
330cm – 08 machines
02 colours
380 Voltage (V)
50 Freequency (HZ)
Shedding cam box
02 Prewindes
Rotary leno LHS and RHS Selvedge
No. of beam per machine - 1
Single beam
Warp beam diameter 900mm
On loom take-up
No. of cloth rollers per machine – 1
06 Warpstop bars

Wvng/11630/2018/01

 

24 SETS VAMATEX SILVER HS LOOMS
Year 2006,
Working width 210 cm,
FIMTEXTILE dobby 20 levers installed model 7P,
8 colours,

Each loom with following accessories:
4 ROY CHRONOX2 weft accumulators,
10 heald frames OMV model SPEEDFIX ULTRALIGHT
10.000 heddles and droppers, with 1 cloth roll

Wvng/11629/2018/01

 

32 SETS VAMATEX K88 RAPIER LOOMS
Width : 190cm
Year : 2002
Stabuli & Fimtextile ( 16 Lever / 16 Shaft )
4 Feeder
Beam & Cloth Roller - 1.5
Wire Heald & Dropper - 5,000pcs
Heald Frame - on the m/c (10 to 12 pcs)

The above m/c are still running with Good condition at Mill Floor

Wvng/11628/2018/01

08 SETS DORNIER AIRJET LOOMS
Yoc : 1997
Working width : 210cm
TEAR DE 4 CORES - JACTO DE AR
Model : LW4S MB 210
Tear Jato Ar Dornier mnb 210

Accessories by Loom :
1,5 Beams each loom
1,5 Fabric Rolls each loom
4 Pré-Feeders each tear
6 Healdframes by loom

Wvng/11627/2018/01

 

20 SETS PICANOL GTX LOOMS

18 PICANOL GTX RAPIER JACQUARD WEAVING MACHINES
Year 1996, Width 190cm,
8 colours, 4 iro weft feeders,
With Bonas IBJ-2 Jacquard for 2688 hooks,
Leno edge, rapier updated to Gammax,
Electronic warp let off and fabric shrink

02 PICANOL GTX RAPIER JACQUARD WEAVING MACHINES
Year 1998, Width 190cm, 8 colours,
4 iro weft feeders,
With Bonas IBJ-2 Jumbo Jacquard for 2688*2 hooks,
Leno edge, rapier updated to Gammax,
Electronic warp let off and fabric shrink

Status: running

Wvng/11626/2018/01

 

4 SETS DORNIER HTV8/S LOOMS
Working width : 210cm,
Year :1990, 1991,1991,1992
Staubli Dobby Type 2667 28 Levers installed
Electronic Let off and take up

Accessories each machine:
2 Beams
2 Cloth Rolls
6 Weft Fedders
8 Heald Frames
1 x Bobbin Stand

Delivery time is March

Wvng/11625/2018/01

 

KARL MAYER AND SUZUKY SAMPLE WARPING MACHINES

No.01 second hand Sample Warping machine KARL MAYER model ROM ROT-O-MATIC
Year of construction 1999
Working widht  2.250 mms (total lenght of the beam 3.000 mms)
Rotative and fixed crell 12 colours
Beaming device for two warp beams
        
No.01 second hand Sample Warping machine SUZUKY model NAS 2000
Year of construction 1990
Working widht  2.000 mms
Crell 8 poositions

Wvng/11624/2018/01

 

4 SETS DORNIER PTV JACQUARD LOOMS

2 set 2002 yom PTV,8 color,190cm with jacquard CX880-2688 hooks jc5,2002 yom

2 set 2001 yom PTV,8 color,190cm with jacquard CX870-2688 hooks jc5,2004 yom

Accessories;
4 weft feeder
1,5 fabric roller
1,5 warp beam
9000 dropper
Harness included
Gantry is not included

Running condition

Wvng/11623/2018/01

20 SETS DORNIER HTV DOBBY LOOMS
Width 200cm
Yom 1996
Staubli electronic dobby 2667 RSV type; 20/18
Electronic let off and take up

Accessories; 
5 weft feeder
1,5 fabric roller
1,5 warp beam
7000 dropper
7000 healdler
10 healdframe

5 ECS for each loom

Running Condition 
  
Wvng/11622/2018/01

4 SETS SOMET ALFA JACQUARD LOOMS
Width : 360cm
Yom : 2005
8 Colour
Bonus-Vande Wille Electronic Jacquard CSJX Type-2688 Hook 600 Series Controller, Yom 2005
Each loom is having separate inverter
Split Warp beam

Accessories:
4 Weft Feeder
1.5 Warp beam
1.5 Fabric Roller
9000 Dropper
1 Gantry for 2 looms
Harness included

Running in Excellent Condition

Wvng/11621/2018/01

1 SIZING MACHINE KARL MAYER / ROTAL MACHINES 
This plant can work with sectional and fractional warp-beams 
Year of construction end of 1999 (started up in 2000), composed as follows : 
12 drying cylinders at 5 bar, 6 tefloned and 6 stainless steel,
Width 2400 mm
4 regulations of drying cylinders temperature 
Recovery group which allows the removal of yarn defect in sizing box when changing the beam 
Suction fan with 2 motors
Pneumatic lift for operator
Exit for beams length up to 3000 (total barrel length), flange diam. 1000 mm., 
1 sizing box with double squeezing (2 immersion rollers and 2 squeeze rollers), width 2400 mm
Width of squeeze rollers 2400 mm
2 trolleys for beam to beam functioning
Expansion comb, automatic zig-zag, pressing roller, 
Waxing device
15 leasing bars 
Splitting lenght 5 mts
Electric box
Karl Mayer / Rotal software
Beam capacity 1000 mm.
Size kitchen with 1 mixer (capacity 550 lts) and 1 steam boiler (capacity 600 lts) 
Creel suitable for 17 warp-beams in working-width 1800/2200 mm, flange diam. up to 1000 mm 

Status : running

Wvng/11620/2018/01

 

12 SETS TSUDAKOMA ZAX-E MACHINES
Year 2003
Working width : 210 cm
4 colors,
Equiped with Staubli 1761-A Cam Box for for 8 levers

Accesories;
2 Warp beams ( 1000 mm dia)
1.5 cloth rollers
5 Heald frmaes
4 weft acumulators
5000 droppers and heald wires

Still running in Perfect condition

Wvng/11619/2018/01

NO.19 SECOND HAND SOMET WEAVING MACHINES MODEL THEMA 11 EXCELL
Years of construction 1995/1996
Working width 2.100 mms
8 colours

NO.01 SECOND HAND SOMET WEAVING MACHINES MODEL ALPHA PGA
Years of construction 2008
Working width 2.100 mms
8 colours

Complete in total with the following jaquard machines:

No.10 Staubli jaquard model CX860 (1344/1200) year 1995/96 controller JC4
No.01 Staubli jaquard model CX870 (2688/2400) year 2000 controller JC6
No.05 Staubli jaquard model SX (2688/2400) year 2009 controller 4 x JC6 + 1 x JC7
No.04 Staubli jaquard model LX1602 (2688/2400) year 2013 controller JC6

And accessoried with following items:
No.01 harness h1700 cm total 8480 ends
No.02 take up rollers
No.1,5 warp beams with flanges diam.800 mms
No.04 weft accumulator ROJ Chrono

Machines still working  

Wvng/11618/2018/01

DORNIER HTV8/SD - 200 and 220 LOOMS

NO. 12  DORNIER HTV8/SD LOOMS
Year 1992 
Width 200 cm - Panel 1
Electronic Dobby Staubli 2667 - 20 levers - 6 colours
Electronic Warp Let Of (EWL) and Electronic Cloth Take Up (ECT)

NO. 5  DORNIER HTV8/SD LOOMS
Year 1993
Width 220 cm - Panel 1
Electronic Dobby Staubli 2667 - 20 levers - 6 colours
Electronic Warp Let Of (EWL) and Electronic Cloth Take Up (ECT)
  
Accessories per loom:
1 beam, 4 weft feeders,
1 cloth roller, 8 heald frames

Wvng/11617/2018/01

 

12 SETS TSUDAKOMA ZAX E TERRY TOWEL WEAVING MACHINES

Width : 230cm
Year : 2002
Staubli 2861 Dobby
16 harness frames
4 weft feeders
17 total center tuckers currently installed on these 12 looms
7 with 1 center tucker - mechanical
1 with 4 center tuckers - mechanical
2 with 3 center tuckers - mechanical
2 with 3 center tuckers - air
1.5 loom beams with each loom top and bottom
All looms are 4 color
Running 18 to 20 harness frames each
All looms have 1250mm diameter Pile beams on top and 1000 mm diameter beam flange on warp beams
All looms with batching unit 
All looms capableof weaving flat as well as terry towel
Nice condition, spares also available

Wvng/11616/2018/01

12 SETS PICANOL OMNI-PLUS 800 LOOMS
Yoc : 2007
Width 220 cm
Staubli 1661 cam
4 nozzles 
6 heald frames
2 weft feeders
1.5 beam with diameter 800mm/cloth roller
5000 headle wires and droppers
Stopped, can test run

Wvng/11615/2018/01

1 SECTIONAL WARPER MAKE BENNINGER, TYPE SUPERTRONIC-2200
Yoc 1988, Working width 2200mm,
Max. warping speed 800 m/min.,
Cone height and length: 162,5 / 1300 mm, max. warp width 340mm,
Max. flange diam. 1.000 mm, warp beam pressure device,
Waxing device ,
380 volts / 50 cycles / 3-phase
with
2 WARPING CREELS, make Benninger
Each 640 creel positions, H-type, pitch 270/270 mm,
Autom. thread tensioner, electr. thread stop motion

Wvng/11614/2018/01

4 SETS STAUBLI NAME EDGE JACQUARD CX170 ND CX172 MACHINES
Size: 64 end Selvedge Jacquards
Year: 2006 - 8
1 x CX172 - 2008 with JC6 Controller
3 x CX170 - 2006 with JC5 Controller
Each with cross rails type D1
Loom fitting suitable for G6200 loom
Condition: Complete and in Good condition
Status: Dismantled and stored in warehouse

Wvng/11613/2018/01
NO.05 SECONDHAND PICANOL OPTIMAX WEAVING MACHINES
Years of construction 2 x 2013 + 2 x 2014
Working widht 2200 mms
8 colours
Electronic Staubli dobby model 2670B (20 shafts)

Each machine complete with following accessories:
1,5 warp beams
1,5 take up roller
12 heald frames
04 weft accumulator
Heald wires and drop wires as fitted on the machines

Wvng/11612/2018/01
24 SETS PICANOL OMNI PLUS MACHINES
Working width : 190cm
Year 2001
Staubli 1661 cam box with 8 cams capacity and 6 installed cams 3/1
4 frames 
4 colors only 2 mounted 
2 Picanol Feeders 2232 Plus
Elsy Electrical 
Let of electrical 
Off loom take up
1,5 beam with flange 1100
Speed 750 rpm 
Warp stop motion 6/4 
Drop/healds 4000
Sumo motor

Wvng/11611/2018/01

DORNIER WEAVING MACHINERY
        
12 Dornier Rapier Looms
Model PTS, 190cm, Jacquard, Year 2013
06 Dornier Rapier Looms
Model HTV, 190cm Jacquard, Year 1992
06 Dornier Rapier Looms
Model HTV, 190cm Jacquard, Year 1994

04 Dornier Rapier Looms
Model HTVM/S, 210cm, Dobby, Year 1989
01 Dornier Rapier Loom
Model HTVM/E, 210cm, Cam Motion, Year 1990
01 Dornier Rapier Loom
Model HTV4/E, 210cm, Cam Motion, Year 1990

06 Dornier Rapier Looms
Model GTN4/SD, 260cm, Dobby, Side Tuckers, Year 1983
06 Dornier Terry Air Jet Looms
Model LTV4F/J, 260cm Terry Jacquard, Year 1991
08 Dornier Air Jet Jacquard Looms
Model LTV4/J, 260cm, Jacquard, Year 1990

01 Dornier Rapier Loom
Model HTV4/S, 400 cm, Staubli Dobby, Year 1990

Wvng/11610/2018/01

5 TERRY SMIT GS-900F MACHINES
WW : 2,90m
Year : 2007

Equipped with:
8 Colours
Electronic Dobby STAUBLI 2668 KSY 047, with 20 levers installed
16 Heald Frames
2 Weft Feeders IRO
1 Upper Beam
1 Down Beam
Batching Motion
4.500 Droppers & Healders
Leno Selvedge

Machines in good condition

Wvng/11609/2018/01
14 SETS DORNIER RAPIER LOOMS
Year 1989
Working Width : 210cm
Model : HTV8/S
 
Equipped with:
8 Colours
Electronic Dobby STAUBLI 2667, with levers 18 levers
10 Healds Frames
3 Weft Feeders
1,5 Warp Beams
1,5 Cloth Roller
Droppers &Healders
 
Machines in very good condition

Wvng/11608/2018/01

BENNINGER SECTIONAL WARPER WITH AUTOMATIC REWINDING MACHINE
Brand: Benninger
Working width 260cm
Year : 1993
Additional creel with 800 positions.
Supply Voltage: 3 x v 220

Wvng/11607/2018/01

06 SETS DORNIER RAPIER JACQUARD LOOMS
Model GTN
Year : 1982/1983
Working width : 260cm
4 Color weft insertion
Staubli Electronic Jacquards
Model CX860 x 2
5,376 hooks installed
JC4 Controllers
Mechanical take up
Side Tuckers
Off  loom take up

Each loom Supplied with :
2 Warp beams 940mm diameter beam flange
1 Alexco off loom take up
Without  Harness
Without weft feeders
Warp bars – Droppers as installed

Wvng/11606/2018/01

10 SETS PICANOL OPM 800-4-P LOOMS
06 Sets WW 340cm
04 Sets WW 280cm
Yoc : 2005
Cam motion, 6 levers installed but suitable for 10
With 4 frames Steel Heddle,
3 weft accumulators IRO with PSO system,
4 Blades guard warp,1 beam flange 1000,
Picanol tuckers (air), AISQ system and ARVD system

Condition: Running

Wvng/11605/2018/01

4 NOS. SECONDHAND SULZER PROJECTILE LOOMS
Model : P7300 B 430 4 SP D12 R
Year : 2004
REINFORCED Execution
4 Colours installed
Split beam Execution
Staubli Electronic dobby
Model : 2665
18 Shafts installed
Steel Projectile D12
Voltage : 380 Volts / 50 HZ / 3 Phase
8 Harness frames
8,000 Heddles and Drop wire
3 Split beams ) 1 ½ Full beam Equivalent) 1100mm Beam Flange Diameter
3 LGL model smart canbus filling feeders

Wvng/11604/2017/12

20 SETS DORNIER RAPIER STAUBLI ELECTRONIC CX860/JC4 & CX870/JC5 WITH 2,688 HOOKS JACQUARD HEADS LOOMS

1 Set Model CX870, JC-5 Year 2006 Hooks 1920
2 Sets Model CX870, JC-5 Year 2006 Hooks 1970
1 Set Model CX870, JC-5 Year 2006 Hooks 1800
2 Sets Model CX870, JC-5 Year 2006 Hooks 2340
4 Sets Model CX860, JC-4 Year 1996 Hooks 1990
1 Set Model CX860, JC-4 Year 1996 Hooks 1640
2 Sets Model CX860, JC-4 Year 1996 Hooks 2440
2 Sets Model CX860, JC-4 Year 1996 Hooks 1500
1 Set Model CX860, JC-4 Year 1996 Hooks 1700
2 Sets Model CX870, JC-5 Year 2006 Hooks 1970
1 Set Model CX870, JC-5 Year 2006 Hooks 1700
1 Set Model CX870, JC-5 Year 2006 Hooks 1990

Wvng/11603/2017/12

24 x PICANOL GAMMAX 8-R RAPIER LOOMS
Year 10.2004-2005,
WW 220 cm
Sumo drive, Max 8 color, Leno, No free flight (GC type)Staubli 2670 electronic dobby

Accessories Per Mc:
20 levers, 10 heald frames ,06 Quick step,
04 Iro Luna X2 weft feeders with PFL1.5 cloth roller,
1.5 warp beam (diameter 800mm/1000mm),
6.000 wires &droppers

20 PICANOL GAMMA 6R RAPIER LOOMS
WW 220 cm
Year 1998-2000 (Cluch type)
Equiped with Staubli 2861 Electr Dobby for 20 levers
10 heald frames, 1.5 cloth rollers,
1.5 warp beams,
4 Iro, 6000 droppers and wires, Leno Salvage

10 x PICANOL GAMMAX 8-R RAPIER LOOMS
WW 190 cm
Year 10.2007 ,
Sumo drive, Max 8 color, Leno ,No free flight (GC type)Staubli 2670 electronic dobby

Accessories Per Mc:
20 levers, 10 heald frames ,06 Quick step,
04 Iro Luna X2 weft feeders with PFL
1.5 cloth roller,1.5 warp beam (diameter 800mm/1000mm),
6.000 wires &droppers
Delivery 30 days


12 PICANOL GAMMA 6R RAPIER LOOMS
Sumo Motor,
WW 220 cm
Year 2001
Equiped with Staubli 2861/2670 Electr Dobby for 20/16 levers
10 heald frames, 1.5 cloth rollers,
1.5 warp beams, 4 Iro, 6000 droppers and wires,
Leno Salvage
Delivery: 30 days

Wvng/11602/2017/12

24 SETS PICANOL OMNI PLUS MACHINES
Year : 2003
Width : 340cms
Sumo Motor
Staubli Dobby 2861 [16 Shafts installed, available Maximum 10]
2 Color
ELO / ETU
Split Beam Execution.
2 Pre Winders
1.5 Beam and 1.5 Cloth Roller
6 Heald frames
10000 Each Healdwires and Droppers
Machines are still Running

Very Well maintained used only Original Spares and Accessories on a Reputed Mills

Note :- Lot of Original Spares and Accessories available at additional Cost

Wvng/11601/2017/12

NO 04 SETS PICANOL GAMMA 8-J RAPIER LOOMS

No. 02 Picanol rapier loom type GAMMA-8-J working width 3400 mm YOC 1999 with electronic STAUBLI Jacquard type DX80 at 2688 hooks controller JC6 Yoc 2009

No. 02 Picanol rapier loom type GAMMA-8-J working width 3400 mm YOC 2001 with electronic STAUBLI Jacquard type SX at 2688 hooks controller JC7 Yoc 2014

Each loom is supllied of:
No. 1,5 single beams
No. 1,5 cloth rollers
Electronic let-off
Electronic take-up
Sumo motors
8 colours
GHL race
Harnesess at 19.200. harnes
No. 4 prewinders with creel
Gantry not included

Wvng/11600/2017/12

NO 03 SOMET RAPIER LOOM TYPE MASTER SM93
W.W. 210cm
With Staubli dobby 2232 at 20 shafts 8 colours,
Yoc 1989 with Socos

Each loom is supplied of:
No.1.5 beams fl.800
No. 2 cloth rollers
Mechanical let-off
Mechanical take-up
No. 12 heald frames with heddles
Warp stop-motion with droppers
No. 3 prewinders with creel

NO  01 SOMET RAPIER LOOM TYPE MASTER SM93
W.W. 230cm
With Staubli dobby 2232 at 18 shafts 8 colours,
Yoc 1988

The loom is supplied of:
No.2 beams fl.800
No. 2 cloth rollers
Mechanical let-off
Mechanical take-up
No. 12 heald frames with heddles
Warp stop-motion with droppers
No. 4 prewinders with creel

NO 01 SOMET RAPIER LOOM TYPE MASTER SM92
W.W. 210cm
With Staubli dobby 2232 at 20 shafts 8 colours,
Yoc 1986

The loom is supplied of:
No.2 beams fl.800
No. 2 cloth rollers
Mechanical let-off
Mechanical take-up
No. 12 heald frames with heddles
Warp stop-motion with droppers
No. 4 prewinders with creel

Looms ready to run

Wvng/11599/2017/12-C

NO. 01 SECONDHAND BENNINGER MODEL BENTRONIC WARPING MACHINES
Yoc : 1999
Working width 2200 mms
beaming machine for warp beams max diameter 1.100 mms.
Crell model BEN-CREEL GM-W/BEN-TENS 640 positions
BEN-SPLITTRONIC 1000

Wvng/11599/2017/12-B

NO. 01 SECONDHAND PRASHANT /GAMATEX WARPING MACHINES
Yoc : 2010
Working widht 2200 mms
beaming machine for warpp beams max diameter 1.100 mms
Crell model LASERTRONIC -1100 588 positions CB-R

Wvng/11599/2017/12-A

NO.01 SECONDHAND AUTOMATIC DRAWING MACHINE ELM MODEL SUPER VEGA 4000
Yoc : 2006
Working with heddles 331 and 382 , “J” type and “C” type
complete with 2 trolley working widht 3600 mms.

Wvng/11598/2017/12-B

06. SECONDHAND DORNIER RAPIER WEAVING MACHINES PTS 8/J
Years of construction 2005
Working widht 2200 mms
8 colours
Electronic Staubli Jaquard model CX870 (2688 hooks) controller JC5

Each equiped with :
02 warp beam with flanges diam.800 mms
01 harness 9600 ends
5000 drop wires
04 weft accumulator
01 take up roller
Delivery march 2018

Wvng/11598/2017/12-A

06 SECONDHAND DORNIER AIRJET WEAVING MACHINES AWSE 4/S
Years of construction 2004 /2005
Working widht 2200 mms
4 colours
Electronic Staubli dobby model 2881 (16 shafts)

Each equiped with :
01 warp beam with flanges diam.940 mms
08 heald frames
5000 heald wires and drop wires
04 weft misurator
01 take up roller
Delivery ready

Wvng/11597/2017/12

NO.06 LEONARDO JACQUARD LOOMS
Width : 360 cms
Year 2002 with Staubli DX80 type 2688 hooks jc6 controller 2011

Accessories :
4 weft feeder
1.5 warp beam
1.5 fabric roller
10000 dropper
Gantry is not included

Wvng/11596/2017/12

2 DORNIER MODEL HTV-8/S LOOMS
Width : 340cms
Yoc : 1988, Staubli dobby
Type 2232 of 28/20 shafts,
Electronic Take up, mechanical let off

Each equipped with:
10 heald frames, 2 weft feeders,
1,5 warp beams,
Heddles and droppers

Wvng/11595/2017/12

NO 10 SETS SECOND HAND AIRJET MODEL OMNIPLUS 800 MACHINES
Year of construction 2010
Staubli electronic dobby model 2881 (16 shafts fitted)
6 colours

Each equipped with :
01 warp beam
01 take up roller
08 heald frames
04 weft accumulator Picanol 1131 X2

Machines are still working  

Wvng/11594/2017/12

18 SETS SULZER PU 183 ES 110 E10 D
Automatic lubrication system
Loepfe Electronic weft stop motion
Mechanical let off
E10 cam box with 4-6 cams as fitted & 6 levers
4  harness frames
2 electrode bars with droppers as fitted
Heavy duty double back rest rolls
Single width beam
Heavy duty off loom take up
Currently producing primary and secondary carpet backing on PP tape
Top beam system available at additional cost
Running secondary carpet backing set up for leno (2 front and 2 back)

Wvng/11593/2017/12

2 SETS YAMADA SINGLE-END SIZING WINDER MACHINE
Model  YS-6, 
Year 1993     
Individual motor driving
Prompt drying system with double-reel system
Heat air circulation device
Permeable sizing device, Squeezer 
No. of Spindles       20  x 1 machine
                               4  x 1 machine
M/C dimensions      8,860mm (L) x 850mm (W) x 1,750mm (H) = 20Sp machine
Winding Speed       Stepless speed controller,  150-350m/min.
Max. Winding dia.   280mm
Take-up tube          Paper tube,  85mmdia. x 180mm    
Take-up style         Cheese (5, 6 inches) or flange bobbin
With                        Press roller squeezer
                               Full bobbin stopper
Heating source       Steam 
Power  (20Sp)        winding motor, 60w x 20
                               yarn setting motor, 6w x 20
                               solenoid motor, 8.8w x 20
                               steam heater  30kw
                               with size temp. auto control device
                               other motors, 1.50kw, 40w, 100w, 1kw x 1 each

Wvng/11592/2017/12

48 SETS PICANOL GAMMA-4-R LOOMS
Yoc : 2006/2007
Width : 190cm
04 Colour
Staubli 2668 dobby
¾ Weft feeders
8 heald frames
1.5 beam with diameter 1000mm
1.5 cloth roller
Running in factory

Wvng/11591/2017/12

12 SETS PICANOL OMNI-PLUS 800 LOOMS
Yoc : 2007
Width 220 cm
4 Color
Staubli 1661 cam with 8 shafts & levers installed
4 nozzles 
6 heald frames
3 weft feeders
1.5 beam with diameter 800mm/cloth roller
5000 headle wires and droppers
Stopped, can test run

Wvng/11590/2017/12

4 SET PICANOL OPTIMAX LOOMS
Width : 220cm
Year of manufacture : 2011
Staubli Electronic dobby 3060 ; 20 Shaft
Free fly System

Accessories :
10 Healdframe
4 Weft Feeder
1.5 Warp beam
1.5 Fabric roller
5000 Dropper
5000 Headler

Running Condition 

Wvng/11589/2017/12

DORNIER HTV JACQUARD LOOMS 190/180CM WITH CX870/860 2688 HOOKS

3 Sets 1996 Yom HTV,8 color,190cm with jacquard CX870-2688 hooks jc5, Yom 2002
2 loom harness 60 ending/cm and 1 loom is with 66 ending/cm

1 Sets 1995 Yom HTV,8 color,180cm with jacquard CX860-2688 hooks jc4, Yom 1995
harness 66 ending /cm

1996 loom are with ECS system

Accessories :
4 weft feeder
1,5 fabric roller
1,5 warp beam
9000 dropper
harness included
gantry is not included

Running condition

Wvng/11588/2017/12

SOMET JUMBO JACQUARD LOOMS

NO. 8 SOMET SUPER EXCEL HTP RAPIER LOOMS
Width 3200 mm, year 1999,
Equipped with electronic jumbo jacquard GROSSE EJP2/6144 hooks
2x looms with top beam

NO. 2 VAMATEX 9000 PLUS RAPIER LOOMS
Width 3200 mm, year 1999,
Equipped with electronic jumbo jacquard GROSSE EJP2/6144 hooks

Accessories:
6-8 weft feeders Sirio Progress,
2 warp beams, 2 cloth rollers, heddles and droppers,
harness 26400 ends -82 e/cm (8xlooms) 

Wvng/11587/2017/12

NOS 12 DORNIER RAPIER LOOMS
Model PTS12J.C
Year : 2013
Working Width 190cm
12 color with Electronic Selectors
Staubli Electronic Jacquard
Model LX1602
5120 Hook Format
5120 Hooks Installed
JC6 Controller
Harness Configurations:
Harness width 165cm
8 machines with 2 repeats x 60 ends per cm
4 machines with 4 repeats x 120 ends per cm
Leno Selvedges
Electronic Take-Up
Electronic Let-Off
Top and Bottom Warp Beams
On Loom Take Up

Each loom with:
2 Warp Beams Top And Bottom
1.5 Cloth Rollers
Staubli Harness As Installed
6 Warp Stop Bars
12 IRO Weft Feeders Model Chrono 3.

Top | Back