FILAMENT/3026/2022/01
1 SSM REWINDING MACHINE
Yoc: 2002
Type: PW1-W/F
Spindles: 36
Conical tube holder
Yarn guide: 1,6 mm
Headstock left: 380 V / 50 Hz
Overfeeding device
Gate tension device
Oiling
Turning table for the supply packages

1 SSM SOFT WINDING MACHINE
Yoc: 2002
Type: PW1-W/F
Spindles: 30
Cylindrical tube holder
Yarn guide: 1,6 mm
Headstock left: 380 V / 50 Hz
Overfeeding device
Gate tension device

FILAMENT/3025/2022/01
1​ GALAN DOUBLING AND TWISTING MACHINE
Model: CRB 225/60
Yoc:      2008
60 positions (30 per side)
140 mm x 16.7 mm ring diameter
​​ 225 mm gauge
​​ 270 mm traverse
​​ S and Z twist
​​ Individual drives and belt driven​
​​ 68 kW motor
​​ 380 V, 50 Hz, 6 Bar
​​ With approx. 13,000 bobbins (aluminum and plastic)

 

FILAMENT/3024/2022/01
1 BARMAG BCF PLANT

Type: STM 16 PP
Yoc: 1994
Electrically and electronically upgraded in 2015
Denier range: 1600 to 2400 Dtex (Carpet yarns)           
Spinning Speed: 1400 – 2000m/min            
Capacity: 2 ton/12hr             
It Includes: 

• Tri colour, 6 Positions (2 ends/position)
• Polymer silos with vacuum system
• Polymer extruders with independent vacuum system
• 3 Polymer extruders (Electrically heated)
• 3 Colour Side extruders (Electrically heated)
• 3 colour metering units
• Air Quenching (heating/cooling)
• Spinfinish mixing station
• Pre- heat oven
• Dowtherm heating system for the spinning beams
• Complete chilled water system includes chiller unit
• 2 x 11 bar Broomwade Air Compressors (193kW each)
• Complete electrical panel setup

Plant is still fully installed.
Price and photos on request

FILAMENT/3023/2021/11

1 ZINSER DRAW WINDER
Model:548.3
Yoc: 1999
2 x 72 positions with (3) draw zones
2 x sets heated godets
Suitable for PET, PA6, PA66
60 ~ 560 dtex

2 EDMUND ERDMANN DRAW TWISTING MACHINES
Type: DMT 24/200
Yoc: 2001
Each machine with 2 x 72 positions (144 total)
2 x heated godets
Gauge: 200mm
Ring ø: 160mm
Take up bobbin: 17”
Suitable for PET, PA6, PA66
60 ~ 560 dtex

FILAMENT/3022/2021/08
01 BARMAG PP-TAPE EXTRUSION LINE
Type FB9-1600-WS/HT
Year : 2013
High Tenacity PP Flat Tape Extrusion Line
Working Width : 1600mm
Die Head Width : 1700mm
Net Film Width approx. 1560mm
Extruder throughput : max 750 kg/h (PP melt capacity)
Final tape width 1,0 -4,5 and 7,0mm
Total Draw Ratio up to approx. 1:13
Denier Range 500 up to 2700 dtex
Practical line speed max. 500 m/min

Consisting of :
01 Barmag Extruder
Model 10E10/27D-HSE (Adiabatic)
Screw Dia. 105 Mm Effective Length 27D
01 Barmag 5-Component Gravimetric
Batch Dosing And Blending System
01 Barmag  Film Slitting Station,
Model LAS 1600 with 2000 Large Size blades
01 Draw Stand I,
Model STB9/I/3/1600/NR
03 Godets Dia. 350mm
Chromium plated width 1600mm

01 HOT AIR STRETCHING  OVEN
Type HLS/1600, 6000mm Long
01 Draw Stand II, STB9/II/4/1600/Onr
04 Godets Dia. 350mm
Chromium plated 1600mm
03 Godets Oil Heated, 01 Godet Ambient
01 Fibrillator
Model FIB5/1600
Needle Roll Dia. 150mm
42 Needle Bars
01 Draw stand III
Model  STB9/III/4/1600/NR
04 Godets Dia. 350mm
Chromium plated 1600mm
02 Godets Oil heated
02 Water cooled
With rubber coated nip roller on the last godet

Available : Immediately

FILAMENT/3021/2021/08
02 SETS SSM PRECISION WINDERS MODEL DP1 W MACHINES
Year : 2007
40 Nos. heads
Can work up to 290mm but in the moment machine is working with 230mm (like picture)
Lubrication system
Can wind from cones or bobbins or from muffs or from hanks
Machine have the adequate spare parts to work with this possibility’s
Machine very good for synthetic yarns like polyester and polyamide texturized yarns

Delivery: Immediate
Condition:Running (next 2 weeks they will be stopped)
Videos: Available

FILAMENT/3020/2021/07

01 SET SSM  DP3-C INTERMINGLING, AIR COVERING MACHINE, YOC 2014, 10 SPIDLES, CONTROLLER SSM MT2
High performance winder with the production of air entangled yarns, with elastomer core, model DP3-C DIGICONE preciflex, with 10 spindles.
Material: Filament yarns, Elastane
Yarn count: max. 3.000 dtex
Supply packages: depending on creel
Traverse length: 100-250 mm infinitely variable
Take up package diam.: up to 280 mm
Take up tubes: cylindrical, max. length 290 mm, min. basic dia. 43 mm
Type of application: Air Covering / Intermingling

5 winding units per section
Head stock with machine terminal with touch screen
Individual control and drive of take-up speed by frequency inverter
Max mechanical speed 1.200 m/min.
DIGICONE preciflex thread laying system by means of servo motor
Precision or DIGICONE winding
Pneumatically controlled back pressure system for tailor-made packages
Tube holder for specific type of tube
Pneumatic winding bracket opener
Electronic length measuring system per spindle
Full package diameter stop per spindle
Internal creel for 1-ply, including yarn sensor per end
1 freely programmable overfeeding device positioned in front of the air jet for optimal control of yarn tension in the air covering / intermingling process
1 freely programmable overfeeding device positioned after the air jet for optimal control of take-up tension

Offer price: Euro 78.000 loaded into container, ex factory, net

Status: complete, in working condition
Available immediately. We can arrange inspection at any time.

FILAMENT/3019/2021/06

01 SET DOUBLING&TWISTINGMACHINEFOR MOF YARNMODELPRM300/9WITHACCESSORIES
Year : 2001

• With 9 spindles in total ononeside.
• Gauge betweenspindles:300mm.
• Traverse: 550mm. (limitedto 450mm to control ballooningthread)
• Displaywithkeyboardthatindicates: RPM, TPM, deliveryrollerspeed, preselectedmeters, preselectedtraverse, form of bobbinbuilding andothers.
• Individual modification of the S / Z torsiondirectionforeachspindle.
• Thread input to machine bymeans of flatpulley
• NBR pressurecylinder.
• Machine stop whenyarnlapsoverfeedingrollers.
• Steel balloon control rings (one perspindle)
• Ironrings: ID 250 x 38.1mm.
• Automaticgreasing of theringsbymeans of a motor-pumpgroup, programmable in interval, duration and injectionpressure.
• Spindle drive: Direct, by individual motors and withouttransmissions.
• Spindlestop: Automatic and individual per spindle, lifting thepressureroller, or at thebreakage of onefeedingyarnif machine isequippedwithyarnbreakingdetectors.
• Spindle motor: 1 AC motor of 1.5kW and frequencyinverter, perspindle.
• Delivery:1ACmotorof1.5KWandfrequencyinverter.Changeoftwistbyincreasingthespeed of thefeedcylinders.
• Ring holder: 1 AC 0.37kW motor and frequencyinverter. Control electronic of bobbinforming.
• Installedpower: 16.5kW,380VIII-N-T,50Hz.
• Dimensions: 3.6 x 1.17 x 2.2 m. (withoutcreel)
• Basic mechanical and electrical spare parts Kit.
• Instruction manual in English in digital format.

FILAMENT/3018/2021/06

01 SET SSM WINDER FOR SEWING THREAD
Type PS6-FW
20 spindles
Year 1999
Automatic doffing
Cone 4", 3.3 conicity
Without lubrication

Price: Euro 32 000 Ex. Works

FILAMENT/3017/2021/05

NEW PILOT POY SPINNING LINE WITH FDY ADAPTATIONS

01 BRAND NEW AEC LABORATORY POY SPINNING LINE
Year : 2020
Complete and still in the Original Packing Cases
The Line is a Complete POY Laboratory Pilot Line
With Separate Segment for FDY yarns in addition
WITH : One Years Extended Manufacturer’s Warranty
From the Future date of installation

Comprising of :
Extruder with Hopper Drier
Barrel 75mm OD x 25mm ID
Gearbox 5KW Motor at 120RPM
4 Ceramic Heaters Max Temp 400 deg C
2 Melt Regulators with Screen changers
1 Metering Pump
1 POY Spin Beam
1 SS Quench Chamber 1700mm x 300mm x 250mm
1 Spin Finish Pump
2 Take up Godets
1 Automatic Take up winder
2 Ends
Max Bobbin diameter 350mm
Package weight 6 KG
120mm traverse
Full Computer PLC Control System

01 FDY SPINNING SECTION

Consisting of :
4 Hot Godet Rolls 160mm dia x 190mm
Max surface Temp 175 deg C
Heavy Steel Structure for FDY Section
Schneider Control Panel

FILAMENT/3016/2021/03

BARMAG EXTRUDER FOR PP TAPES
Type: FB9-1600-WS/HT
Complete with winding.
Yoc: 2013
Working width: 152 cm
Power: 650 kW
Width of tapes: 1,25 - 5,0 mm
Count of tapes: 60-400 tex
Continuous sheet thickness measurement by X-ray
Max.production: 750 kg/h
Speed max: 500 m/min
3x400 V AC
Air pressure: 6 -10 bar up to 70 m³ / h with simultaneous use of 2 hand injectors.
On this machine can be made tapes of: 1,25 up to 13 mm width; from 60 up to 890 tex.

The line includes:
- Device for continuous film thickness measurement with an ionizing radiation source BST ProControl.
- Feeder Doteco
- Water cooler RHOSS for cooling film, Nozzle width 170 cm - width of exit nozzle on the aggregate
- Rollers V1 - 3 items
- Stretch furnace 1.9 x 6 m 
- Rollers V2- 4 pcs oil-heated Fibrylizator unit
- Rollers V3- 4 pcs (2 oil-heated and 2 water-cooled)
- Barmag winder - 250 spindles 90 mm, winding Unit model ATW200 LGT  Yoc: 2013
  
 Status: Machine is in excellent condition, currently stopped in the production hall on the same place where it was working

 BARMAG EXTRUDER FOR PP TAPES
Type: FB9-1600-WS/HT
Complete with winding unit
Yoc: 2013 is also available

FILAMENT/3015/2021/01

1 ICBT RING TWISTER
Type: DT 660-STFI
Yoc: 2001
66 Pos.
Max. twist: 1
Gauge: 660 mm
Pot dia.: 325 mm

1 ICBT RING TWISTER
Type: DT 660
Yoc: 1997
48 Pos.
Max.: Twist 1
Gauge: 660 mm
Pot dia.: 325 mm

2 SAURER ALLMA RING TWISTERS
Type: AZB 200/1
Yoc: 1975
84 Pos.
Ring dia.: 140-160 mm
Traverse: 14”
Max. Twist 3

1 SAURER ALLMA RING TWISTER
Type: AZB
Yoc: 2000
144 Pos.
Ring dia.: 160 mm
Traverse: 14”
Max. Twist 4


FILAMENT/3014/2021/01

02 SSM PRECISION WINDERS
Year 2007
Type DP1-W
40 spindles each
Work in 8" traverse but can wind in 6 to 10"
Feeding by: Cones / Muffs / Hanks

Unit price: Euro 68 000 Ex. Works

FILAMENT/3013/2021/01

01 SSM WINDER FOR SEWING THREAD
Year 1999
Type PS6-FW
20 spindles
Automatic doffing
Cone 4", 3.3 conicity
Without lubrication

Price: Euro 35 000 Ex. Works

FILAMENT/3012/2021/01

1 FOURNÉ MULTIFILAMENT PILOT LINE
Yoc: 2013
Capacity 35 t/day
Single Pos.
                 
Consisting of:
Volumetric High Precision Dosing System
Extruder D22 x 25D
Spinneret D150x 13
Quench active cooled 150 x 1400 mm
Rolls – 1 mono SR- 3 Duo´s heated – 1 winder delivery
SR -Duo´s 160 deg C. max.
Winder parallel traverse 250 mm (10“)
Max. 100-1000 mm papertube D45 x 290 mm
                 
1 FOURNÉ MULTIFILAMENT PRODUCTION LINE
Yoc: 2009
Capacity: 105 t/day
 2 Pos.
                 
Consisting of:
Volumetric High Precision Dosing System for each Extruder
3 Extruder D30 x 25D hydraulic split to spin pack
Rectangular Spinneret
2 Quenchs active cooled 150 x 1400 mm
Rolls – 1 mono SR- 1 mono Parallel- 1 Mono SR
2 x 3 Duo´s heated 160 deg C.
1 Duo active cooled
String up
1 mono SR-1 mono SR-1 mono SR
1 automatic winder delivery
3 winders manual parallel
Traverse stroke: 250 mm (10”)
Speed: 100-400 m/min
Spindleholder for tubes: K200-K250-K335


FILAMENT/3011/2020/11

WINDING MACHINE BRAND SSM TYPE PW2
Year : 2007
Number 60 Positions - Final Bobbin Cylindrical 8”
Oil Device - All Positions Running

FILAMENT/3010/2020/11

01 SETS AIR JET COVERING MACHINES BRAND SSM TYPE DP2C
20 Positions Heach One Machines Superior Creel
Second Machines Lateral Creel
Year 2000- Jet Heberlein - Autodoffing
Oil Device - Final Bobin 290 Mm

01 SET AIR JET COVERING MACHINES BRAND SSM TYPE DP2C
30 Positions Machines Superior Creel
Year 2001 - Jet Heberlein - Autodoffing
Oil Device - Final Bobin 290 Mm

COVERING MACHINES BRAND RPR TYPE GSP18  
Year 1996 - Number 234 Spindles
Completed Aluminium Spools

FILAMENT/3009/2020/10
25 POS. WINDING MACHINE
Brand: SSM DP2 to wind normal or soft reels or to interlace yarns
Year: 2009 final
Bobin 230 or 290 mm 
Double creel 
Good price

FILAMENT/3008/2020/08
TIRE CORD CABLERS
12 RIETER – ICBT DIRECT CABLE TWISTERS
Model CP 460.G3
Year 2004
168 Spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube take up up 350mm tube Length

01 RIETER-ICBT DIRECT CABLE TWISTER
Model CP. 510.G3/.S
Year 2004
152 Spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube take up 350mm tube Length

FILAMENT/3007/2020/08

01 EDMUND ERDMANN SAMPLE DRAW TWISTER
Model : DMT. 24/200
Year : 1999
24 position – double sided – 12 per side
Outboard creel with herbertein Jets
04 Godet rollers
120mm dia – 120mm diam – 120mm dia – 60mm dia
Take up onto 17 inch tube
Pineapple shaping
200mm spindle gauge
Full computer control

03 EDMUND ERDMANN DRAW TWISTER
Model DMT. 24/200
Year : 2003
120 Position – double sided – 60 per side
Ground creel feed stations with Herbertein Jets
04 Godet rollers
120mm dia – 120mm diam – 120mm dia – 60mm dia
Take up onto 17 inch tube
Pineapple shaping
200mm spindle gauge

Full Computer control.

FILAMENT/3006/2020/08

COMPLETE PLANT OF CIRCULAR LOOM FOR PLASTIC SACK POLYPROPYLENE
03 X Bag conversion line Lohia BCS-850/40
06 X Circular Loom China
03 X Circular Loom Yong Ming
15 X Circular Loom Hong Xing C5-65
22 X Circular Loom Yong Ming
56 X Circular Loom Dong Shivan
30 X Circular Loom Lohia-Starlinger
01 X Coating machine SJFM-Z7
01 X Compressor Kaeser TE 121
01 X Compressor + Tube Kaeser CSD 22
05 X Cutting Machine XinBao
03 X Cutting Sewing Prolink P2C5-30
01 X Drilling Machine
01 X Hi Screw Hitachi 37 2000
02 X Lathe
01 X Line extruder Windmoller&Holscher 7602
01 X Tape winder Yong Ming
01 X Line extruder ReifenhauserReckstauder
01 X Tape winder Georg Sahm 230 E
01 X Line extruder Sengar-Taiwan
01 X Tape winder SAHM S 100 E
01 X Line extruder China
01 X Tape winder
01 X Line extruder LohiaLorex F90B 1200
01 X Tape winder Lohia
01 X Mixer
02 X Plastic tube China
01 X Plastic tube Senfa
02 X Plastic tube
03 X Press machine
01 X Printing machine Ruian Hong Feng
03 X Printing machine
01 X Saw
03 X Scale
10 X Sewing machine
04 X Trafo Stem Trento
03 X Trolley
02 X Welding machine

FILAMENT/3005/2020/02

SAHM  TYPE 260 EWINDING MACHINES  
Yoc : 1992, 89 heads, machines in grey  
Yoc : 1986, 90 heads, machines in green 
Yoc : 2001, 90 heads, machines in grey

Each with 90 (84) winding positions /250 mm traverse
Cone diameter 93 mm
Without control cabinet

The systems were in operation until the end of 2018 and are in good condition
(On mill. Floor, test-run possible)

FILAMENT/3004/2019/11

1 Sizing line for synthetic filament yarn composed of:
*1 Direct Sizing Line TSUDAKOMA KSH500 1985 updated yoc 2002, Creel 1280 ends, single sizing box, hot air Dryer 2 chamber, 1.800 mm width , Dryer 5 cylinder,  With PROTECHNA cam scan 5201 device 2002, Take up on Warp h.1800 x dia.914 mm.
*1 ROSTONI Beaming yoc 1995, Feeding 16 beams, magnetic breakage of beams, delivery beam h.2200/2100 x dia.1000 mm. max. barrel width 3.000 mm.
or as alternative:
*1 ROSTONI Beaming yoc 2001, Feeding 16 beams, breakage of beams by motor, with Calender, delivery beam h.3400 mm. x dia.1000 mm. max. barrel width 3.850 mm.

1 ZELL PROCOMAT SIZING MACHINE
Yoc 1991, for continuous filament yarn, creel  14 beams dia.1000 mm., rope braking, single sizing box with cylinders width 1900 mm.,
Dryer 8 cylinders, steam heating., Beaming width 2400 mm., diameter 1000 mm., for yarn sizing from direct beams  and  beam to beam.

2 RATTI 2X1 TWISTERS MOD.R-364 DT 110 
Yoc 2000, 384 spindles, spindle dia.110 mm., 2 differential decks (1S and 1Z), feeding from cops max 330 mm., take up tube dia.56 mm. x length 170 mm., 3976 t/m.,
take up max bobbin dia.200 mm., inverter, computer.

1 ICBT 2X1 TWISTER MOD.DT 860P-RE
Yoc 1998, 8 spindles (4+4), gauge 800 mm., feeding 10", dia.300 mm., take up run 250 mm., max dia.350mm. (max 15 kgs.),
PN tension device, Central conveyor belt, Inverter + PLC, pneumatic air threading device, from 4000 to 20.000 dtex, max speed 100 m./1', t/m. 10/2000

1 TWISTING SET CONSISTING OF:
1 TAGLIAFERRO Assembly Winder, Year 2003, 12 spindles (2 x 6), with 12 weft pre-feeders
1 TWISTECHNOLOGY (GALAN) Twister, year 2003 Type TWV-250-2 M/2, 2 x 6 spindles, rings dia. 200mm.

3 RATTI 2X1 TWISTERS MOD.R-522
Yoc 1980 about, 152 spindles, feeding cops 420 mm. x dia.135mm., take up tube 230 mm.

4 ARRATEX 2X1 TWISTERS
Yoc 1990 about, 100 spindles each, with oven for texturizing, feeding cops 420 mm. x dia.135 mm., take up tube 230mm.

2 RATTI HOLLOW SPINDLE FANCY TWISTERS
Yoc 1980 about, 90 spindles each.
1 RATTI Rewinder mod.CN, 52 spindles.
Machines completes with flanged bobbins 2 lb

FILAMENT/3003/2019/10
RPR TWO FOR ONE (EMPTY SPINDLE)
Type : PR2N
Year : 1988
80 spindles
Bobbins 55*170mm
Working with fancy yarns

FILAMENT/3002/2019/09
01 KARL MAYER FILAMENT WARPING MACHINE
Model : ZMZ 1800/100
Year 1997
Warping width : 1800mm
Flange Diameter : 1000mm
With
Static Eliminators
With
Protechna warp scanners
Mayer S Roll Tensionner
With Ceramic Eye Board
With
Mayer truck creel
1216 Running ends for suppliers filament packages
Arranged 4 zones x 4 high x 76 long

FILAMENT/3001/2019/05

BARMAG AND RIETER MACHINES
02 Model FK6.HY-1,Year 2004 Positions 216
02 Barmag Model FK6-M1000, Year 1997 Position 240
02 Barmag Model FK6-V1000 HTI, Year 1998 Position 240
01 Barmag Model FK6-M700, Year 1986 Position 216
01 Barmag Model FK6-V900, Year 1990 Position 216
01 Barmag Model FK6-M900, Year 1990 Position 216
01 Barmag Model FK6-M900, Year 1997 Position 216
01 Barmag Model FK6-M900, Year 1991 Position 216
01 Barmag Model FK6-M900, Year 1993 Position 216
01 Barmag Model FK6-M900, Year 1994 Position 216
01 Rieter Model Goal 1200 SDS, Year 2003 Position 240
01 Rieter Model Goal 1200 SDSAD, Year 2003 Position 240

Delivery Immediate

FILAMENT/3000/2019/04

33 SETS FADIS REELING MACHINES
Yom 1985 - 18 Sets
Yom 1987 - 11 Sets 
Yom 1988 - 02 Sets
Yom 1990 - 01 Set
Yom 2000 - 01 Set

32 Sets Total length : 2000 (Reel 600mmx2)
01 Set Total long length : 2800(Reel 1000mm x 2)
Reel Width :60cm,
Both side, So you can make 6 pcs of  12cm width Hanks
It depend on the width of hank.

Price :US$1,500/set C&F C:5% as final for short reel
         US$2,500/set C&F C:5% as final for short reel

FILAMENT/2999/2019/04

02  SETS FADIS MOD.MR 1000  REELING MACHINES
Year 2002
2 Independent Swifts
Swift Length 1000 mm each
Perimeter from 1350 to 1550 mm
  
Price : Euro 6.800,00 Each – Ex Our Works Loaded In Container  

FILAMENT/2998/2019/03

04 SETS  ICBT
Year:  2001
Model - CP 510 G3 Cables
Position EA - 152
Max Pot Package Diameter = 255mm
Pot Package Stroke =10”(254mm) Or 12”(305mm)
Max Speed = 9,300 RPM
Package Overhead Creel Feed - 2

FILAMENT/2997/2018/11

AIRJET TEXTURISING MACHINES 

1 Set,Aiki, 1998 Yom, 120Spindle,At-501 Type
1 Set,Aiki, 2006 Yom, 108Spindle,At-501 Type, Along With Lycra And Slub Apparatuses
Running  Condition 
Delivery Is Immediate

FILAMENT/2996/2018/11

1 AIKI TEXTURIZING MACHINE
Year 2014,240 spindles
Still working

Price : $250000 FOB

FILAMENT/2995/2018/11

ONE  COMPLETE TMT POLYESTER FDY SPINNING PLANT
Year of Manufacture : 2009
Comprising of
4 Lines
Each Line with 12 positions
Each winder with 12 ends
Total 576 Thread Lines
Yarn Count Range:     Denier 30 to 250 FDY
Luster : Any Type
Capacity : 1,000 Tons Per Month  

Price : To Be Negotiated

FILAMENT/2994/2018/10

OERLIKON BARMAG COMPLETE POLYESTER TECHNICAL YARN SPINNING PLANT TO PRODUCE - PET FDY
(High Tenacity Fully Drawn Industrial Yarn) i.e.HM High Modulus, SLS – Super Low Shrinkage Yarn, YOC 2012 NEW NEVER USED IN ORIGIANL BOXES
Starting from: - PET (Polyethyleneterephthalate) chips, postcondensated, standard textile viscosity.

The lay-out is based on the following requirements of the Purchaser
Raw Material PET – chips, bright, postcondensated,
High viscosity type 1 for SLS (IV approx. 0,96) and type 2 for HM
(IV approx. 0,98)
End products PET – high tenacity FDY for Industrial applications
Capacities / Fineness range / Yarn type
Output
high tenacity yarn
approx. 13,200 t/a
Yarn type HM - MR HM - SB SLS
Denier range [den] 1500 - 3000 1000 - 1500 500 - 1000
Nominal average, capacity [t/a]

Spinning plant:
1 Spinning line, denominated as line A for yarn type HM-MR, with 4 Spinning positions,
applying 4-end spinning and 4-end winding
1 Spinning line, denominated as line B for yarn type HM-SB, with 4 Spinning positions,
applying 6-end spinning and 6-end winding
1 Spinning line, denominated as line C for yarn type SLS, with 4 Spinning positions,
applying 6-end spinning 6/12-end winding
consisting of:

Extrusion:
2 Extruders for Line A
Horizontal execution, Type 15E10,
screw 􀁉 150 mm, length 24 D,
multi zone heating and cooling
1 Extruder for Line B
horizontal execution, Type 17E10,
screw 􀁉 175 mm, length 24 D,
multi zone heating and cooling
1 Extruder for Line C
horizontal execution, Type 15E10,
screw 􀁉 150 mm, length 24 D,
multi zone heating and cooling Spinning plant
Provided are
1 Spinning line, denominated as line A for yarn type HM-MR, with 4 Spinning positions,
applying 4-end spinning and 4-end winding
1 Spinning line, denominated as line B for yarn type HM-SB, with 4 Spinning positions,
applying 6-end spinning and 6-end winding
1 Spinning line, denominated as line C for yarn type SLS, with 4 Spinning positions,
applying 6-end spinning 6/12-end winding
consisting of:

Extrusion:
2 Extruders for Line A
Horizontal execution, Type 15E10,
Screw 􀁉 150 mm, length 24 D,
Multi zone heating and cooling
1 Extruder for Line B
Horizontal execution, Type 17E10,
Screw 􀁉 175 mm, length 24 D,
Multi zone heating and cooling
1 Extruder for Line C
Horizontal execution, Type 15E10,
Screw 􀁉 150 mm, length 24 D,
Multi zone heating and cooling

Delivery: Immediate

FILAMENT/2993/2018/08

NO.04 CHENILLE TMT TEMAT MACHINE
Yoc : 1998
With No 96 spindles each /1 ,
Ring diam. 127 mm. , tube height 450 mm. , 
External feeding creel, Rotary  blade, Magitex

Price : Euro 25.000 Each /1 , FOB Brasil Port

FILAMENT/2992/2018/07

ASSEMBLY WINDER  SSM
Yoc - 2001
Model - DP1-D
20 positions
Package on cylindrical tube 8"
Electronic meter counter per head
Internal  creel  for 2 ends 
Meter count for each head
Automatic doffing
Package Conveyor
Vacuum system

FILAMENT/2991/2018/07
BARMAG TEXTURISING MACHINES
Machine - 2
Yom - 1998
Model - FK6-1000
Type - M
Spindle - 216

FILAMENT/2990/2018/06
NO .1 CHENILLE MACHINE G&G
Model -  ACTA 
Spindles  - 120
Yoc  - 1997

NO .1 CHENILLE MACHINE G&G
Model -C  ACTA 
Spindles - 120
Yoc - 1997

NO .1 CHENILLE MACHINE G&G
Model - ACTA 
Spindles - 120
Yoc.- 2000
Rotating blade system - Ring size diam. 115 mm
Complete with standard creel

NO. 1 WINDER CORGHI 6 HEADS GROOVED DRUM
Traverse - 10
Yoc. - 1997
Complete with Iteco chenille clearers

NO. 1 WINDER CORGHI 6 HEADS GROOVED DRUM
Traverse  - 10
Yoc. - 1997
Complete with Iteco chenille clearers

Price : Euro 70.000,00 ex-works loaded

FILAMENT/2989/2018/06
NO. 2 SSM DP3-C AIR TEXTURIZING & AIR COVERING MACHINES OF 40 POSITION EACH 
No. 1 machine Yoc : 2007
No. 1 machine Yoc : 2008
Single side gauge 440 mm
1200 m/min winding speed
Digicone winding
Preciflex traverse system
Individual Motor Drive per Spindle
Rubber Coated Feed Rolls
Lost End Detection
Manual doffing
With Heberlein Jets
Take Up 10” (290 mm) cylindrical cone

Machines still working.

FILAMENT/2988/2018/03
AIKI AIR TEXTURIZING MACHINE
Model : AT-501 B-4F (B-2F) Twin  GE
Yoc : 2000
Width : 2850mm (Without creel)

Main spec.:
No.of  Position :144pos.
Denier  :30-600 denier (Total denier for winding)
Max.Feed roller speed : Min .200m/min~Max.1000m/min
Max.Windingspeed : Min.200m/min ~max.800m/min
Package size : Traverse length  200mm(s”)
Max.dia.250mm
No.of Feed roller : 4/pos .(2/pos)
Apronnip roller system
No.of Delivery roller : 2/pos
Niprollersystem
Second beater : 1000mm tube beater
Slubequipment : Included for B-4F(72pos.)

Machine  dimension :Height      2866mm
Length      18,900mm

Electric capacity       :440v        60H         3phases
(B-4F)         (B-2F)
Motor (3.7kw*16)     59.2kw        44.4kw(3.7*12)
2nd heater                18.0kw       
Air sucation             5.5kw         5.5kw
Blower (3.7kw*2)      7.4kw         7.4kw
Others0.5kw0.375kw
   -------------------------------------------------------------------------------
Total                        90.6kw      75.675kw

Other  :  Edge breaker ,Oiling ,and Yaen traverse

FILAMENT/2987/2018/03-A
NO.1 FANCY YARN MACHINE LEZZENI MOD. TF/DS
Yoc : 1995
240 Spindle double side (120 spindles per side)
Ring size 90mm – Gauge 20mm
Feeding from yarn
Single hollow spindle
Driven by PC
External creel
Complete with :
No. 1 Rewinder for flanged bobbins – Yoc. 1995
44 positions double side (22 per side)
Lot of spare parts like tubes, flanged bobbins trolleys etc.

FILAMENT/2987/2018/03-B
FANCY YARN MACHINE NEEDLE HEADS SYSTEM
16 Positions
For the productions of “Tagliatino” and/or “Fettuccina” yarns
Feeding by creel
Package on cone 6”
Maximum cone diameter 320mm
Speed from 4 to 27 m/m

FILAMENT/2987/2018/03-C
FLANGED WINDER PAFA MOD. BC 200 – YOC 2004
12 Positions double side (6 positions per side )
For flange reels in both cylindrical or bottle shapes

FILAMENT/2987/2018/03-D
NO. 7 COMPLETE HAMEL SAURER ELASTOTWISTER MOD. ET240LE
Yoc : 2000
Twisting and elastic filament coupling (Lycra)
200 Spindle / Each
Package 6” Conical 4°20’
PLC
900 Flanged Bobbins
1 Set Spare Parts

Complete with :
No. 2 Assembling WI

FILAMENT/2987/2018/03-E
DOUBLE TWISTING MACHINE SAVIO MODEL GEMINIS
Yoc. 1995
180 Spindle double side (90 spindles per side)
Indipendent side drive by PLC
S & Z Twisting driven by inverter
Feeding 8”
Delivery 6”
Pot diameter 200mm
Air threading
Magitex vacuum system

FILAMENT/2987/2018/03-F
CROCHET MACHINES COMEZ MOD. CT8B/600
YOC. 2001
Operating width 600mm.
5 Weft bars-gauge 15
3-rollers feeder for weft threads

Complete with :
Heddle-bar for elastic threads
Automatic picking-up device for elastic threads
Collector of the finished product on circular rolls
Creel 264 positions
SYSTEM-WIN software
COMEZDRAW 2.0 – software system for the creation of patterns draft

FILAMENT/2987/2018/03-G
DOUBLE NEEDLE BED ELECTRONIC WARP KNITTING MACHINES
BRAND COMEZ MODEL DNB/EL 800 – YOC. 2010
Gauge 10-6 Weft bars – operating width 800mm
DAM/800- Automatic stop motions for incorrect product
winding onto the rollers
DAR/800 – Automatic stop motion for thread breaks or empty cones
AL.FT/STR – 3-roller feeder for weft threads
(Electronic drive)
BANC-P/D – Rear support bench
Creel             600 pos. Gauge 22
With double tension with thread stop

FILAMENT/2987/2018/03-H
ELECTRONIC WINDER FOR NARROW FABRICS (RIBBONS, BANDS, LACES, TRIMMINGS, ETC.)
COMEZ AR 902/EL – YOC. 2003
Maximum dimensions of the reel 300mm width – diameter 300mm

FILAMENT/2987/2018/03-I
BRAIDING MACHINES BRAND LESMO
No. 20 machines 4 heads each with 8 carriers 80 stick
No.  6 machines 4 heads each with 12 carriers 80 stick

FILAMENT/2987/2018/03-J
BRUSHING MACHINE BRAND STAMPERIA EMILIANA
Model Lisa type CC/1
YOC. 2001
Working width 1650mm
One carbon brushing unit
Complete with dust suction device

FILAMENT/2986/2018/03
50 SETS BARMAG 8 ENDS WINDERS
Model: CW 6R, Winding axe length:1.2m,
1998-2000
All working condition

Top | Back